Hotpoint CB310 Quick Manual

Quick guide
THANK YOU FOR BUYING A HOTPOINT PRODUCT
In order to receive a more complete assistance, please
register your product on

PRODUCT DESCRIPTION

FIRST TIME USE
Wait at least two hours, after the installation, before connecting
the appliance to the power supply. Connect the appliance to the
power supply it starts the operation automatically. The ideal storage
temperatures for the food are preset in the factory.

CONTROL PANEL

"ACTIVE OXYGEN" FUNCTION
Through the emission of a small quantity of ozone, this function
enables a reduction in the proliferation of bacteria and microorganisms
inside the refrigerator and limits bad odours.
To activate the Active Oxygen function, press the
control panel.
When the function is activated, a coloured light will appear on the
device, according to the following cyclical features:
• Green light: ozone emission phase
• Blue light: antibacterial and anti-odour action phase (without
ozone emission)
To deactivate the function, simply press the
panel.
Note: when the Active Oxygen function is activated, a faint odour might
be perceived inside the refrigerator (the same odour that sometimes
accompanies a thunder storm due to the zone produced by the lightning):
it is absolutely normal.
Note: Disabling the function optimizes energy consumption. Keep the
bottle rack grid in the upper parts of the comparison to optimize the
function.
FAN*
The fan activates and deactivates automatically for a better
temperature distribution and for humidity reduction in the fridge
compartment.
ON/STAND-BY
Press the button for 3 seconds to turn the appliance off. In
Stand-by mode the light in the refrigerator compartment does not turn
on. Press the button again briefly to reactivate the appliance.
Note: this does not disconnect the appliance from the power supply.
TEMPERATURE DISPLAY
The display may alternately show the refrigerator compartment
temperature (between 2°C and 8° C) or the temperature of the freezer
compartment (between -16°C and -24°C).
* Available only on certain models
www . hotpoint . eu/ register
1.
6. 5. 4. 3.
button on the
button on the control
Before using the appliance carefully read the Safety
Instruction.
After turning the appliance on, you must wait for 4-6 hours for the
correct storage temperature to be reached for a normally filled
appliance. Position the antibacterial anti-odour filter in the fan as
demonstrated in the filter packaging (if available). If the audible signal
sounds, it means that the temperature alarm has intervened: press the
button to switch off the acoustic alarms.
2.
VACATION (HOLIDAY MODE)
You can use this function in the event of your prolonged
absence. Press the
The display will show the temperature of the refrigerator compartment
(12°C) and the
remove the food from the refrigerator compartment and keep both
doors closed - the refrigerator will maintain a suitable temperature to
prevent odours from forming. The freezer, however, will stay turned on.
To turn off the function press the
REFRIGERATOR COMPARTMENT TEMPERATURE
It is possible to set a different temperature with the "Fridge" button.
FAST COOL
Press the "Fridge" button for 3 seconds before placing a large
quantity of fresh food in the refrigerator compartment.
When the function is turned on, the
function turns off automatically after 6 hours, or manually by pressing
the "Fridge" button for 3 seconds.
TURNING OFF THE SOUND ALARM
To turn off the sound alarm, briefly press the
FREEZER COMPARTMENT TEMPERATURE
It is possible to set a different temperature with the "Freezer" button.
FAST FREEZE
Press the "Freezer" button for 3 seconds 24 hours before
putting large quantities of food to freeze in the freezer compartment.
When the function is turned on the icon lights up
The function turns off automatically after 48 hours, or manually by
pressing the "Freezer" button again for 3 seconds.
Note: avoid a direct contact between the fresh food and the food that is
already frozen. To optimise the freezing speed, drawers can be removed
and the food can be placed directly on the bottom of the compartment.
1.
Temperature Display
2.
Freezer temperature - Fast freeze
3.
Turning off the sound alarm
4. On/stand-by
5. Vacation (holiday mode) - "Active Oxygen"
6.
Refrigerator temperature - Fast cool
button for 3 seconds to turn the function on.
icon will light up. After activating the function,
button for 3 seconds.
icon will be displayed. The
EN
button.
.