Advertisement

Quick Links

USER
MANUAL
Vision 5 Action Camera

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Vision 5 and is the answer not in the manual?

Questions and answers

Summary of Contents for DragonTouch Vision 5

  • Page 1 USER MANUAL Vision 5 Action Camera...
  • Page 2: Table Of Contents

    Overview of Modes Customizing Your Vision 5 Connecting to The XDV APP Playing Back Your Content Deleting Videos and Photos on Your Vision 5 Offloading Your Content Offloading Your Content to Smartphone or Tablet Adjusting The Zoom Level Reformatting Your Micro SD Card...
  • Page 3: Your Vision 5

    YOUR VISION 5 14 6 14 7 1. Power / Mode / Exit Button 8. Working / Charging Indicator 2. Shutter / Select Button 9. Screen 3. Up Button 10. 1/"4 Screw Hole-tripod interface 4. Down Button 11. MicroSD Slot 5.
  • Page 4: Getting Started

    TURNING ON / OFF Wi-Fi To turn on Wi-Fi Welcome to your new Vision 5. To capture video and photos, you need a micro SD card Turn on camera, press and hold Up button to turn on Wi-Fi. You can also enter Camera (sold separately).
  • Page 5 Photo Mode Playback Mode Press Mode button once to switch to Photo Mode after you turn on camera. Press Mode button several times to switch to Playback Mode. In Photo Mode, press OK button, the camera takes a photo. In Playback Mode, press the Up/ Down button to scroll through video or photo files. 00001 /04372 4373...
  • Page 6: Customizing Your Vision 5

    Burst Photo Reset To Factory Settings Firmware Version Camera Setting Mode CUSTOMIZING YOUR VISION 5 Press Mode button several times to switch to Camera Setting Mode. You can change Video Setting camera settings in this mode. 1. Video Resolution: 4K 30FPS, 2.7K 30FPS, 1080P 60FPS, 1080P 30FPS, 720P 120FPS, 720P 60FPS, 720P 30FPS Default setting is 4K 30FPS.
  • Page 7 4. Loop Recording: Off / 2minutes / 3minutes / 5minutes Camera Setting Default setting is Off. 1. Exposure: -3, -2, -1, 0, 1, 2, 3 Using Loop Recording, you can continuously record video, but save only the moments that Default setting is 0. you want.
  • Page 8: Connecting To The Xdv App

    Turns off the LCD display after a period of inactivity to save battery life. To turn on the LCD You can check the model, version, updated time and manufacturer of your Vision 5. display again, press any button on the camera.
  • Page 9: Deleting Videos And Photos On Your Vision 5

    DELETING VIDEOS AND PHOTOS ON YOUR VISION 5 1. Enter Playback mode. 2. Press Up / Down button to scroll through the video or photo files. 3. Press and hold OK button for three seconds. The screen shows ‘’Delete this file?
  • Page 10: Offloading Your Content To Smartphone Or Tablet

    The Zoom function lets you adjust how close or far away the subject appears in your photo. • Capture video at lower frame rates and resolutions The default is no zoom. Zoom function is available in Video and Photo Mode. Vision 5 • Use Screen Saver setting.
  • Page 11: Battery Storage And Handling

    BATTERY STORAGE AND HANDLING To start recording: Press and hold the video button for 5 seconds. The camera will emit one beep and the The camera contains sensitive components, including the battery. Avoid exposing your amera light will flash while recording. camera to very cold or very hot temperatures.
  • Page 12: Mounting Your Camera

    3. Lift the PCB board and slide out the battery, as shown in the picture. MOUNTING YOUR CAMERA Note: Do NOT rotate the PCB board to avoid reversing the camera and video button functions. Attach your camera to helmets, gear and equipment. 4.
  • Page 13: Contact Us

    CONTACT US For any inquiries, issues or comments concerning our products, please send E-mail to the address below, and we will respond as soon as possible. E-mail: cs@tabletexpress.com US customer service line: (301)670-7335 8am-5pm EST Monday-Friday (except holidays)

Table of Contents