Instructions Box Contents Aurender S10 AC Power Cord Dongle (option) iPad and digital cables are not included. Optional dongle available for Constellation pre-ampli ers to control volume and source selection through the Aurender App. Instructions https://www.aurender.com/page/manual-s10...
- Please note that hard drives can break down. It is important to back up your music collection periodically to a separate memory device. In the event of drive failure, Aurender is not responsible for any loss of data. The drive manufacturer will only replace faulty drives under warranty and do not compensate to any loss of data.
Page 3
Flashing will stop when the unit is o . To switch to the Standby mode, go to the Server Menu under Settings of the Aurender App. Scroll to the bottom to nd the Standby On/O button.
7/27/2018 AURENDER - Reference Music System Press once to skip to the previous track. 6. AMOLED Display For display options, please refer to the section on AMOLED Display. The display will automatically dim after being idle for longer than 3 minutes. (from beta App 1.5.09 /System Software 2.0.41 and above).
Page 5
7. Gigabit Ethernet Port To connect to a network and Network Attached Storage (NAS) devices. The Aurender is able to stream music from NAS. The ethernet cable to the network router should be connected before turning on the Aurender. Warning Before connecting audio cables, rst check to see that all devices are grounded using grounded plugs and grounded sockets.
Need help?
Do you have a question about the S10 and is the answer not in the manual?
Questions and answers