Warranty And Liability - UNISENSE SULF Series User Manual

WARRANTY AND LIABILITY

n p
otice to urchaSer
This product is for research use only . Not for use in human diagnostic or
therapeutic procedures .
w
arning
Microsensors have very pointed tips and must be handled with care to
avoid personal injury and only by trained personnel .
Unisense A/S recommends users to attend instruction courses to ensure
proper use of the products .
w l
arranty and iability
The hydrogen sulfide microsensors are covered by a limited warranty .
For the SULF-type the warranty period is 6 months and for the H
this is 3 months . Microsensors are a consumable . Unisense will only
replace dysfunctional sensors if they have been tested according with
the instructions in the manual within 14 days of receipt of the sensor(s) .
The warranty does not include repair or replacement necessitated by
accident, neglect, misuse, unauthorized repair, or modification of the
product . In no event will Unisense A/S be liable for any direct, indirect,
consequential or incidental damages, including lost profits, or for any
claim by any third party, arising out of the use, the results of use, or the
inability to use this product .
Unisense mechanical and electronic laboratory instruments must
only be used under normal laboratory conditions in a dry and clean
environment . Unisense assumes no liability for damages on laboratory
instruments due to unintended field use or exposure to dust, humidity
or corrosive environments .
r a
epair or djuStment
Sensors and electrodes cannot be repaired . Equipment that is not
covered by the warranty will, if possible, be repaired by Unisense A/S
with appropriate charges paid by the customer . In case of return of
equipment please contact us for return authorization .
For further information please see the document General Terms of Sale
and Delivery of Unisense A/S as well as the manuals for the respective
products .
S-type
2
5