Operation; Normal Operation Of The Tamper; Tamping Force Adjustment - Barista Technology Puqpress 1-000-11 Series Instruction Manual

3. Switch on the tamper using the main switch at the back side
(pos. 12).

5 Operation

5.1 Normal operation of the tamper

1. Actuate the main switch on the back side of the tamper (pos. 12).
2. Insert the port-a-filter entirely in the clamp after initial levelling of
ground coffee in filter basket.
3. The tamper automatically detects the metal port-a-filter using
the contactless sensor (pos. 4).
4. Remove the port-a-filter after a full cycle of approx. 1.5 seconds.

5.2 Tamping force adjustment

The tamping force (kg) can be adjusted on the display at the right
side. For force adjustment use the "+" or "- " button. The force
setting is presented on the display in kilograms (kg).
Tamping Force
(kg)
Cleaning
10
Force setting 'up'
Force setting 'down'