SVS PB-3000 Quick Start Manual

Hide thumbs Also See for PB-3000:

Download this manual

Congratulations on choosing the SVS PB-3000, one of the most powerful and advanced

subwoofers in the world. We know you're anxious to get it cranking so the following steps will

guide you through the quick and easy installation process.

We strongly recommend reading the PB-3000 Owner's Manual to get the best possible

performance out of your new subwoofer. You'll ﬁnd useful information about subwoofer

placement, connections, DSP functions and more.

Unbox It

If you followed the PB-3000 Subwoofer unboxing instructions properly you will

have the following items in front of you. Please conﬁrm all pieces are available

before continuing.

[PB-3000 Subwoofer]

[Detachable Power Cord]

Quick Start Guide

PB-3000

[Removable Metal Grille]

[Port Plugs]

Page 1 Quick Start Guide PB-3000 Congratulations on choosing the SVS PB-3000, one of the most powerful and advanced subwoofers in the world. We know you’re anxious to get it cranking so the following steps will guide you through the quick and easy installation process.
Page 2 Hook It Up For most set-ups, a single RCA subwoofer interconnect cable running from the AV Receiver’s “SUB 1” output to the PB-3000’s “LFE” line level input is all that’s required to connect the subwoofer into your system. If you run separate Preampliﬁer and Power Ampliﬁers, follow the “Line Level Connection –...
Page 3 S T A - 8 0 0 D | 2 For connection to an AV Receiver, set the PB-3000 volume to -10 in the app (on the rear panel, all but the last two lights illuminated). Set the low pass ﬁlter to LFE and the phase to 0 degrees, then run auto-set-up on the AV Receiver.