ZSK T8 Operating Manual

ZSK T8 Operating Manual

Network control unit
Hide thumbs Also See for T8:
Table of Contents

Advertisement

Operating Manual
Network
T8 Control Unit
Version 2.0
Published by:
ZSK Stickmaschinen GmbH
- Dokumentation -
D-47800 Krefeld-Gartenstadt
Magdeburger Str. 38 - 40
© '07 by ZSK, Printed in Germany

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the T8 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for ZSK T8

  • Page 1 Operating Manual Network T8 Control Unit Version 2.0 Published by: ZSK Stickmaschinen GmbH - Dokumentation - D-47800 Krefeld-Gartenstadt Magdeburger Str. 38 - 40 © ’07 by ZSK, Printed in Germany...
  • Page 2 Subject to change © ’07 by ZSK, Printed in Germany...
  • Page 3: Table Of Contents

    Operating modes setup ........1 - 1 T8 control unit with desktop PC/laptop..... 1 - 1 The following modes can be implemented with this configuration: .
  • Page 4 T8 control unit settings ........
  • Page 5 Variant 2 ........3 - 10 Saving monogram in ZSK ring buffer ....3 - 12...
  • Page 6 Necessary operating system settings ..... . . 6 - 1 C - 4 Network T8 Control Unit – Version 2. 02060t20IVZ.fm 11.12.07/Ch,Kx...
  • Page 7 Turning off user account control ......7 - 10 Enabling/disabling a guest account..... . 7 - 12 Network T8 Control Unit – Version 2. C - 5...
  • Page 8 ........7 - 17 Windows Vista Starter/ Home Basic/Home Premium 8 - 1 Appendix A: Options for network operation (T8) Appendix B: Network setup (brief overview) Appendix C: Use of domains Appendix D: Limited server functionality...
  • Page 9 Contents Network T8 Control Unit – Version 2. C - 7 02060t20IVZ.fm 11.12.07/Ch,Kx...
  • Page 10 Contents C - 8 Network T8 Control Unit – Version 2. 02060t20IVZ.fm 11.12.07/Ch,Kx...
  • Page 11: Basic Informations

    1.1 Operating modes setup 1.1.1 T8 control unit with desktop PC/laptop The T8 control unit can be networked with any PC that has a 10/100 megabit/s Ethernet network card. Chapter 1.2 Preconditions for network operation contains the exact requirements to be met by PCs operating in these networks.
  • Page 12: The Following Modes Can Be Implemented With

    Embroidery jobs generated by the Production Manager can be transferred to a ma- chine with a T8 control unit that is connected via a network. For this purpose the monogram machine mode must be activated on the T8 control unit.
  • Page 13: T8 Control Unit With Other Zsk Machines

    The T8 control unit cannot be networked with machines having an MSCD or MSCA control, LCD control unit or even a T8 control unit. It can only be networked with other ZSK machines having a TFT or MPC control unit.
  • Page 14: The Following Operation Can Be Implemented With

    00490304 The following operation can be implemented with this configuration: Designs in the ZSK memory of a networked machine equipped with a TFT or MPC control unit can be loaded from the T8 control unit. A machine equipped with a TFT or MPC control unit cannot, however, transfer designs to a machine equipped with a T8 control unit.
  • Page 15: Preconditions For Network Operation

    2 computers - Connection between PC and machine via a hub with RJ45 UTP cable: un- crossed cable for connecting PC and machine via a hub Network T8 Control Unit – Version 2.0 1 - 5 02060120.fm 11.12.07/Ch,Kx...
  • Page 16: Required Operating System For Desktop Pc/Laptop

    TFT/MPC control unit. If you wish to establish a network connection from a machine with an T8 control unit to one with a TFT/ MPC control unit, you therefore need to install a new operating system.
  • Page 17: Network Cabling

    1.3.1 RJ45 cable connection (standard) The T8 control unit is connected by means of an RJ45 network, also known as a twisted-pair Ethernet. A 10/100 megabit network card is installed in the T8 control unit. It has an RJ45 network connector.
  • Page 18: Note The Following When Using An Rj45 Network

    • Network connecting cable type UTP CAT 5 (Unshielded Twisted Pair) • A crossed cable is required for the direct connection between the T8 and PC. • Uncrossed cables are required for connecting the T8 and PC via a hub:...
  • Page 19 3 (PC) 00490415 00490417 02059002 The network cables are shown in different colors for the purposes of NOTE illustration. However, they are all identical uncrossed UTP network cables. Network T8 Control Unit – Version 2.0 1 - 9 02060120.fm 11.12.07/Ch,Kx...
  • Page 20: Bnc Cabling (Special Case)

    1.3.2 BNC cabling (special case) The use of a BNC cable connection is only necessary when connect- NOTE ing the T8 control unit to a TFT or MPC control unit. Additional hardware is required [Chapter 1.1.2 T8 control unit with other ZSK machines] Note the following when using an BNC network: •...
  • Page 21: Configuration

    This guide does not cover the installation and con- figuration of the PC's network card. You need appropriate administrator rights on your PC in order to make the necessary settings. Network T8 Control Unit – Version 2.0 2 - 1 02060220.fm 11.12.07/Ch,Kx...
  • Page 22: Necessary Operating System Settings (Windows)

    Each system connected to the network must be assigned a unique IP address. The IP address consists of four three-digit number blocks each separated by a dot (xxx.xxx.xxx.xxx). The number range is 1 through 254. Issuing IP addresses: 2 - 2 Network T8 Control Unit – Version 2.0 02060220.fm 11.12.07/Ch,Kx...
  • Page 23: A) Small Networks Embracing A Small Number Of Systems And Not Connected To A Company Network

    ZSK EPC systems: unix Typical application: connecting an T8 to a PC and EPCunix system, or an T8 to a TFT and EPCunix system Für EPCunix Systeme sind zwangsweise die IP-Adressen 192.6.2.x zu verwenden (mit x = 0…9). The other systems must be assigned IP addresses 192.6.2.y (where y = 11 to 254).
  • Page 24: Setting Up File And Print Sharing

    An appropriate name for a PC using GiS software, for example, would be GISPC. Make a note of the computer name; it has to be entered when setting up a network connection from the T8 control unit to the PC. 2 - 4 Network T8 Control Unit –...
  • Page 25: System-Specific Settings

    Under Windows XP Professional Use simple file sharing (recommended) should be deselected in the folder options. Disable Sharing Wizard: Under Windows Vista Business/Enterprise/Ultimate Edition Use Sharing Wizard (Recommended) should be deselected in the folder options. Network T8 Control Unit – Version 2.0 2 - 5 02060220.fm 11.12.07/Ch,Kx...
  • Page 26: Usingguest Or User Accounts (Windows)

    2.2.2 User account Setting up a special user account for network access to the PC (from the T8 control unit) is practicable only under Windows NT 4.0/2000/XP Professional and Win- dows Vista Business/Enterprise/Ultimate. A user name and a user password must be entered when creating the account.
  • Page 27: T8 Control Unit Settings

    02060006 • Press [R3] Network setup key Thenetwork setup dialog appears, in which the following four config- urations for network operation by the T8 control unit can/must be en- tered: Network T8 Control Unit – Version 2.0 2 - 7...
  • Page 28 Configuration Figure 2.3: T8 control unit, network setup 02060007 1. IP address and subnet mask 2. Computer name 3. Network user name 4. Network password 2 - 8 Network T8 Control Unit – Version 2.0 02060220.fm 11.12.07/Ch,Kx...
  • Page 29: Ip Address And Subnet Mask

    • Select the key. [L3] IP address and subnet mask Figure 2.5: T8 control unit, network IP address and subnet mask 02060008 • Activate Issue manually option. [L3] Network T8 Control Unit – Version 2.0 2 - 9 02060220.fm 11.12.07/Ch,Kx...
  • Page 30 When assigning the IP address, note the remarks in Subsection 2.1 Necessary op- erating system settings (Windows) as well. • To accept the IP address, press the key. [L8] Confirm 2 - 10 Network T8 Control Unit – Version 2.0 02060220.fm 11.12.07/Ch,Kx...
  • Page 31 IP address and subnet mask 02060011 • Check that the option is selected. [L6] Use default value • To accept the settings, press the key. [L8] Confirm Network T8 Control Unit – Version 2.0 2 - 11 02060220.fm 11.12.07/Ch,Kx...
  • Page 32: Computer Name

    Figure 2.9: T8 control unit, network setup 02060012 • Select the key. [L3] Computer name Figure 2.10: T8 control unit, network setup 02060013 2 - 12 Network T8 Control Unit – Version 2.0 02060220.fm 11.12.07/Ch,Kx...
  • Page 33 Press [OK] [ESC] key to accept the new computer name. If the key is pressed, the [OK] [ESC] new computer name is not accepted. Network T8 Control Unit – Version 2.0 2 - 13 02060220.fm 11.12.07/Ch,Kx...
  • Page 34: Network User Name

    If a user account is being used, enter the relevant name. When using a guest account or under Windows 95/98/ME Figure 2.12: T8 control unit, entering network user name 02060014 2 - 14 Network T8 Control Unit – Version 2.0 02060220.fm 11.12.07/Ch,Kx...
  • Page 35: When Using A User Account

    Press [OK] [ESC] key to accept the new network user name. If the key is pressed, [OK] [ESC] the new network user name is not accepted. Network T8 Control Unit – Version 2.0 2 - 15 02060220.fm 11.12.07/Ch,Kx...
  • Page 36: Network Password

    2000/XP Professional, enter the password for the created user account. When using a guest account or under Windows 95/98/ME Figure 2.15: T8 control unit, entering network password 02060016 2 - 16 Network T8 Control Unit – Version 2.0 02060220.fm 11.12.07/Ch,Kx...
  • Page 37: When Using A User Account

    Configuration When using a user account The password previously entered as an example under Windows was -Terminal- T8. The network password must then also be-Terminal-T8. Figure 2.16: T8 control unit, entering network password 02060017 Close the menu dialog by pressing the keys on the cursor pad.
  • Page 38 T8 control unit, switching off machine 02060018 If necessary, in order to use the T8 control unit in large company net- NOTE works, special configurations of the T8 control unit can be entered in consultation with the network administrator (e.g. automatic alloca- tion of the IP addresses by a DHCP server).
  • Page 39: Checking The Network And Tips On Troubleshooting

    • the installation and configuration of the network card (PC) • the installation and configuration of the TCP/IP protocol (PC) • the configuration of the IP address and subnet mask on the T8 control unit. 2.4.1 Network test from the T8 control unit to the PC...
  • Page 40 Name resolution and tips on what to do if the test fails again are contained in Sec- tion 2.4.3 Troubleshooting hints. If the IP address is entered directly, continue with the Network test (ping) dialog. 2 - 20 Network T8 Control Unit – Version 2.0 02060220.fm 11.12.07/Ch,Kx...
  • Page 41 (ping) with IP address entered 02060021 • To carry out the test now press the [L8] Test key If the following menu appears, the test (transmission) has been success- ful. Network T8 Control Unit – Version 2.0 2 - 21 02060220.fm 11.12.07/Ch,Kx...
  • Page 42: Network Test From Pc To T8 Control Unit

    IP address entered 02060022 • You can now return to the basic screen (e.g. by pressing the key repeat- [ESC] edly). 2.4.2 Network test from PC to T8 control unit Figure 2.24: Windows NT 4. 0/2000/ XP/Vista, run... 00491603 • From the Start menu, select the Run ... option: •...
  • Page 43 The IP address 192.6.1.7 in the illustrations is only an example. NOTE Figure 2.26: MS-DOS prompt, Screenshot following a successful ping test: 00491516 Figure 2.27: MS-DOS prompt, Screenshot illustrating faulty network: 00491515 Network T8 Control Unit – Version 2.0 2 - 23 02060220.fm 11.12.07/Ch,Kx...
  • Page 44 Lease Obtained ....: Lease Expires ....: 2 - 24 Network T8 Control Unit – Version 2.0 02060220.fm 11.12.07/Ch,Kx...
  • Page 45: Troubleshooting Hints

    Configuration 2.4.3 Troubleshooting hints In the event of problems with Name resolution on the PC, as described in Section 2.4.1 Network test from the T8 control unit to the PC: Windows 2000 operating system and later versions: Figure 2.28: • Select the option Enable Net-...
  • Page 46: Further Troubleshooting Tips

    Network and sharing center. (You can start the Network and sharing center by keying in net as the search term.) 2 - 26 Network T8 Control Unit – Version 2.0 02060220.fm 11.12.07/Ch,Kx...
  • Page 47: Additional Tips If Using Bnc Connections

    Is the connected cable type compatible with the PC network card? Automatic detection of media type or correct setting for media type Is operating system Windows 95 or later installed for TFT/MPC control unit? Network T8 Control Unit – Version 2.0 2 - 27 02060220.fm 11.12.07/Ch,Kx...
  • Page 48: Important Information And Typical Applications For The

    Typical application 1: simplest configuration Network comprising: • One machine with an T8 control unit • A PC with GiS BasePac software (referred to as GISPC in the following) • The data exchange directory is created on the GiSPC...
  • Page 49: Typical Application 3: Special Configuration

    2. Enable data exchange directory for network operation Kapitel 2.6 3. Set up the access path for the GiS software to the data exchange directory Kapitel 2.7 4. Set up network connection at T8 control units Kapitel 3.1.2 and Kapitel 3.2.1 Network T8 Control Unit – Version 2.0 2 - 29 02060220.fm 11.12.07/Ch,Kx...
  • Page 50 3. Set up the access path for the BasePac software to the data exchange directory On the GISPC: • In the BasePac software, set up the access path to the ZSK memory of ma- chine: C:\ZSK \MUSTER 4. Set up network connection at T8 control unit.
  • Page 51 (for every directory!). Alternatively, if a guest account is used, leave the access authorization settings on Everyone. • Use the following share names: For machine 1, enable the directory C:\MACH_001 \ZSK under the share name: FRMA_001 . For machine 2, enable the directory C:\MACH_002 \ZSK under the share name: FRMA_002.
  • Page 52 On the GISPC: • In the BasePac software, set up the access path to the ZSK memory of machine 1: C:\MACH_001 \ZSK \MUSTER • In the BasePac software, set up the access path to the ZSK memory of machine 2: C:\MACH_002 \ZSK \MUSTER •...
  • Page 53 (for every directory!). Alternatively, if a guest account is used, leave the access authorization settings on Everyone. • Use the following share names: For machine 1, enable the directory C:\MACH_001 \ZSK under the share name: FRMA_001 . For machine 2, enable the directory C:\MACH_002 \ZSK under the share name: FRMA_002.
  • Page 54 On the GISPC: • In the BasePac software, set up the access path to the ZSK memory of machine 1: \\SERVER \FRMA_001 \MUSTER • In the BasePac software, set up the access path to the ZSK memory of machine 2: \\SERVER \FRMA_002 \MUSTER •...
  • Page 55 Configuration 4. Set up network connections at T8 control units: On the machines' T8 control units: • Set up the network connection for machine 1 to \\SERVER \FRMA_001. • Set up the network connection for machine 2 to \\SERVER \FRMA_002.
  • Page 56: Create Data Exchange Directory And Enable For

    2.6 Create data exchange directory and enable for network operation (Windows) Machines equipped with a T8 control unit need a subdirectory on the network PC for exchanging data with the GiS software. Create a directory named ZSK on the PC's hard disk with the Windows Explorer. The path to the directory is irrelevant, but it must be named ZSK.
  • Page 57: For Gis Production Manager Software On Pc

    For machine n: the directory c:\prodman\mach_00n\zsk\muster is to be created. The ZSK directories (c:\prodman\mach_00x\zsk [with x = 1…n]) must be en- abled for network operation with different share names. To sum up, the following parameters are to be set for allowing access to the directory/directories: •...
  • Page 58: Exchange Directory

    00491103 The menu that appears allows you to set the parameters for accessing the ZSK memory. Figure 2.31: GiS BasePac Parameter setting Accessing ZSK memory 00491102 2 - 38 Network T8 Control Unit – Version 2.0 02060220.fm 11.12.07/Ch,Kx...
  • Page 59 Configuration • First select the menu item Change the ZSK Memory directory. This opens a window in which you can define the access paths for ZSK memory directories. Figure 2.32: If the list in the large window does GiS BasePac...
  • Page 60 Once this setting is adopted, monograms and designs created with GiS BasePac can be saved directly to the ZSK memory (the data exchange directory). A machine with a T8 control unit can subsequently load the designs contained in this data exchange directory via the network.
  • Page 61: Network Operation With Gis Basepac Software

    In the Saving options dialog, define the start and end points of the design: Figure 3.2: • Enable desired options. GiS BasePac Saving options • Confirm the dialog with [OK] 00491104 Network T8 Control Unit – Version 2.0 3 - 1 02060420.fm 11.12.07/Ch,Kx...
  • Page 62: Variant 1

    • In the Assign design number dialog, confirm the defaulted design number with [OK] The created design is saved in the ZSK memory under this number. • You can enter a different design number and name if you wish. 3.1.2 Connection from the T8 control unit to the data exchange...
  • Page 63 02060025 • In the Check pantograph configuration dialog, enter the machine setup used with the cursor keys. • Select with the keys. [L8] [R8] [OK] Network T8 Control Unit – Version 2.0 3 - 3 02060420.fm 11.12.07/Ch,Kx...
  • Page 64: Variant 2

    [L4] Design manager Figure 3.8: T8 control unit, Disk/memory/network/ USB device, Variant 2 02060024 • Press key. [L3] Load design from network The following sequence applies to both variants. NOTE 3 - 4 Network T8 Control Unit – Version 2.0 02060420.fm 11.12.07/Ch,Kx...
  • Page 65: Variant 1

    Network operation with GiS BasePac software If a connection has already been set up on the T8 control unit, it will now be dis- played and can be used. Otherwise, a new connection can be set up as follows: Figure 3.9:...
  • Page 66: Variant 2

    Figure 3.12: Select T8 control unit, Select newnetwork connection 02060029 • Select the desired directory with the cursor keys and create the connection with [L8] Select network connection 3 - 6 Network T8 Control Unit – Version 2.0 02060420.fm 11.12.07/Ch,Kx...
  • Page 67 This manual does not go into the remaining menu dialogs for loading NOTE designs. Information on this subject is contained in the Quick refer- ence guide T8 control unit. Network T8 Control Unit – Version 2.0 3 - 7 02060420.fm 11.12.07/Ch,Kx...
  • Page 68: Automatic Mode, Monogram Machine

    Network operation with GiS BasePac software 3.2 Automatic mode, monogram machine 3.2.1 Connection from the T8 control unit to the data exchange directory Figure 3.14: T8 control unit, machine basic screen 02060005 • Press [R1] Select machine design Figure 3.15:...
  • Page 69: Variant 1

    Network operation with GiS BasePac software If a connection has already been set up on the T8 control unit, it will now be dis- played and can be used. Otherwise, a new connection can be set up as follows: Figure 3.16:...
  • Page 70: Variant 2

    Figure 3.19: Select T8 control unit, Select newnetwork connection 02060029 • Select the desired directory with the cursor keys and create the connection with [L8] Select network connection 3 - 10 Network T8 Control Unit – Version 2.0 02060420.fm 11.12.07/Ch,Kx...
  • Page 71 Figure 3.20: T8 control unit, machine basic screen 02060031 The machine awaits the transfer of a design by the GiS BasePac or GiS Production Manager software. Network T8 Control Unit – Version 2.0 3 - 11 02060420.fm 11.12.07/Ch,Kx...
  • Page 72: Saving Monogram In Zsk Ring Buffer

    These designs are executed by the machine in the sequence in which they were created. The GiS BasePac software contains a dialog that lists all of the designs transferred to the machine for execution. 3 - 12 Network T8 Control Unit – Version 2.0 02060420.fm 11.12.07/Ch,Kx...
  • Page 73 Ring buffer displayed on the left. Click the button in this 00491112 window to obtain a list of designs currently saved in the ring buffer: 00491113 Network T8 Control Unit – Version 2.0 3 - 13 02060420.fm 11.12.07/Ch,Kx...
  • Page 74 Network operation with GiS BasePac software 3 - 14 Network T8 Control Unit – Version 2.0 02060420.fm 11.12.07/Ch,Kx...
  • Page 75: Windows 95/98/Me

    The operating system may have to be restarted between individual steps of the installation routine. Network T8 Control Unit – Version 2.0 4 - 1 02060320.fm 11.12.07/Ch,Kx...
  • Page 76: Setting Up The Tcp/Ip Protocol

    • To do this, click on the button. [Add…] 00491524 • Mark the entry Protocol. Figure 4.3: Windows 95/98/ME, Networking components • Click on [Add…] 00491525 4 - 2 Network T8 Control Unit – Version 2.0 02060320.fm 11.12.07/Ch,Kx...
  • Page 77 The settings on all the other tabs are correct when the TCP/IP protocol is config- ured for the first time. For verification purposes, the default settings are illustrated below: Network T8 Control Unit – Version 2.0 4 - 3 02060320.fm 11.12.07/Ch,Kx...
  • Page 78: Dns Configuration

    Figure 4.6: Windows 95/98/ME, TCP/IP Properties, DNS configuration 00491528 WINS configuration: Figure 4.7: Windows 95/98/ME, TCP/IP Properties, WINS configuration 00491529 Gateway Figure 4.8: Windows 95/98/ME, TCP/IP Properties, Gateway 00491530 4 - 4 Network T8 Control Unit – Version 2.0 02060320.fm 11.12.07/Ch,Kx...
  • Page 79: Netbios

    Windows 95/98/ME NetBIOS Figure 4.9: Windows 95/98/ME, TCP/IP Properties, NetBIOS 00491531 Bindings Figure 4.10: Windows 95/98/ME, TCP/IP Properties, Bindings 00491532 Advanced Figure 4.11: Windows 95/98/ME, TCP/IP Properties, Advanced 00491533 Network T8 Control Unit – Version 2.0 4 - 5 02060320.fm 11.12.07/Ch,Kx...
  • Page 80 • Confirm the Properties of TCP/IP dialog with the button. [OK] The Network dialog appears again. Figure 4.12: Windows 95/98/ME, Network 00491524 • Select the Identification tab. • Enter computer name. 4 - 6 Network T8 Control Unit – Version 2.0 02060320.fm 11.12.07/Ch,Kx...
  • Page 81: Setting Up File And Print Sharing

    • Select File and Print Sharing. • Enable the option I want to be able to give others access to my files. • Exit the dialog with [OK] Network T8 Control Unit – Version 2.0 4 - 7 02060320.fm 11.12.07/Ch,Kx...
  • Page 82: Installing Client For Microsoft Networks

    Windows 95/98/ME, Network, Client for Microsoft Networks Properties 00491503 • Check the settings and click to close the dialog. [OK] • Also close the Network dialog by clicking [OK] 4 - 8 Network T8 Control Unit – Version 2.0 02060320.fm 11.12.07/Ch,Kx...
  • Page 83: Define Identifiers By Means Of Computer Names And Workgroups

    • In this context also observe the remarks in Subsection 2.1 Necessary operating system settings (Windows). • An optional field is provided for additional text describing the computer. • The select the Setting up File and Print Sharing tab. Network T8 Control Unit – Version 2.0 4 - 9 02060320.fm 11.12.07/Ch,Kx...
  • Page 84: System-Specific Settings

    Enabling access control for network resources Figure 4.17: Windows 95/98/ME, Network, Client for Microsoft Networks Properties 00491512 • Enable the option Share-level access control. • Go back to the Configuration tab. 4 - 10 Network T8 Control Unit – Version 2.0 02060320.fm 11.12.07/Ch,Kx...
  • Page 85: Create Data Exchange Directory And Enable For

    Figure 4.19: Windows 95/98/ME, MS-DOS prompt 00491506 • To create the directories, enter the following commands and, in each case, con- firm with [RETURN] mkdir c:\zsk mkdir c:\zsk\muster Network T8 Control Unit – Version 2.0 4 - 11 02060320.fm 11.12.07/Ch,Kx...
  • Page 86 Figure 4.20: Windows 95/98/ME, MS-DOS prompt 00491503 A directory named ZSK and a subdirectory named MUSTER are thus created on hard disk C. • Close the MS-DOS Prompt by clicking the cross symbol at the top right of the screen.
  • Page 87 [Apply] [OK] The ZSK directory on hard disk C can now be accessed by another PC via the net- work. This is illustrated by the change in the directory symbol in the overview of files and directories on hard disk C.
  • Page 88 Subsection have to be repeated. In this con- text also observe the remarks in Subsection 2.5 Important information and typical applications for the following sections and chapter Network operation with GiS BasePac software. 4 - 14 Network T8 Control Unit – Version 2.0 02060320.fm 11.12.07/Ch,Kx...
  • Page 89: Windows Xp Home Edition

    The symbols for My Computer and My Network Places are now visible on the Windows Desktop (basic screen). The classic start menu has now been activated. 00491602 00491629 Network T8 Control Unit – Version 2.0 5 - 1 02060520.fm 11.12.07/Ch,Kx...
  • Page 90: Setting Up The Tcp/Ip Protocol

    Windows XP, Network connections 00491630 • Position the mouse on the entry Local Area Connection. • Press the right mouse button. • In the menu that appears, select Properties. 5 - 2 Network T8 Control Unit – Version 2.0 02060520.fm 11.12.07/Ch,Kx...
  • Page 91 Windows XP, tings with Advanced ...: Advanced TCP/IP Settings The previously entered IP address 192.168.0.x should already be visible on the tab labeled IP Set- tings. (see above) 00490624 Network T8 Control Unit – Version 2.0 5 - 3 02060520.fm 11.12.07/Ch,Kx...
  • Page 92: Dns Tab

    For verification purposes, the default settings are illustrated below: DNS tab: Figure 5.7: Windows XP, Advanced TCP/IP Settings, 00491620 WINS tab Figure 5.8: Windows XP, Advanced TCP/IP Settings, WINS 00491623 5 - 4 Network T8 Control Unit – Version 2.0 02060520.fm 11.12.07/Ch,Kx...
  • Page 93: Options Tab

    Options tab => Properties - TCP/IP Filtering Figure 5.10: Windows XP, Advanced TCP/IP Settings, Options, Properties 00491621 • After checking all settings, to exit from Advanced TCP/IP Settings. [OK] Network T8 Control Unit – Version 2.0 5 - 5 02060520.fm 11.12.07/Ch,Kx...
  • Page 94: Authentication Tab

    Local Area Connection Properties, General 00490612 Authentication tab • Select the Authentication tab and check the settings illustrated alongside. Figure 5.12: Windows XP, Local Area Connection Properties, Authentication 00491610 5 - 6 Network T8 Control Unit – Version 2.0 02060520.fm 11.12.07/Ch,Kx...
  • Page 95: Advanced Tab

    Then select the Advanced tab and, as before, check the settings. Figure 5.13: Windows XP, Local Area Connection Properties, Advanced 00491611 • Go back to the General tab. Network T8 Control Unit – Version 2.0 5 - 7 02060520.fm 11.12.07/Ch,Kx...
  • Page 96: Setting Up File And Print Sharing

    Name service provid- er setting. 00491609 • If Client for Microsoft Networks is not among the listed items, it has to be add- ed via Install ... and Client. 5 - 8 Network T8 Control Unit – Version 2.0 02060520.fm 11.12.07/Ch,Kx...
  • Page 97: Defining Identifiers: Computer Names And Workgroups

    System Properties, Computer Name Changes • Confirm the entry with [OK] the dialog System Properties also with [OK] • Follow the restart instructions is- sued by the system. 00491605 Network T8 Control Unit – Version 2.0 5 - 9 02060520.fm 11.12.07/Ch,Kx...
  • Page 98: Using Guest Accounts

    00491625 • Enable the account by clicking Turn On the Guest Account. • Close the User Accounts dialog and the Control Panel dialog (e.g. with the shortcut [ALT]+[F4] 5 - 10 Network T8 Control Unit – Version 2.0 02060520.fm 11.12.07/Ch,Kx...
  • Page 99: Create Data Exchange Directory And Enable For Network Operation5

    [RETURN] mkdir c:\ZSK mkdir c:\ZSK\MUSTER A directory named ZSK and a subdirectory named MUSTER are thus created on hard disk C. • Close the MS-DOS Prompt by clicking the cross symbol at the top right of the screen.
  • Page 100 Windows XP Home Edition • To enable the ZSK directory for the network, double-click the My Computer symbol on the Desktop: 00491602 • In the My Computer dialog, Figure 5.24: Windows XP, click the symbol for hard disk C: Control Panel,...
  • Page 101 Figure 5.29: Once file sharing has Windows XP, been enabled, directories Network Sharing and or folders can be enabled Security (right) in the zsk Properties dialog. 00491615 Network T8 Control Unit – Version 2.0 5 - 13 02060520.fm 11.12.07/Ch,Kx...
  • Page 102 Apply and then [OK]. 00491616 The ZSK directory on hard disk C can now be accessed by another PC via the net- work. This is illustrated by the change in the directory symbol in the overview of files and directories on hard disk C.
  • Page 103 Subsection have to be repeated. In this con- text also observe the remarks in Subsection 2.5 Important information and typical applications for the following sections and chapter Network operation with GiS BasePac software. Network T8 Control Unit – Version 2.0 5 - 15 02060520.fm 11.12.07/Ch,Kx...
  • Page 104 Windows XP Home Edition 5 - 16 Network T8 Control Unit – Version 2.0 02060520.fm 11.12.07/Ch,Kx...
  • Page 105: Windows Nt 4.0/2000/Xp Professional

    • In the dialog Taskbar and Start Windows 2000, Menu Properties enable the op- Taskbar and Start Menu tion Classic Start menu. Properties • Confirm the dialog with [OK] 00491639 Network T8 Control Unit – Version 2.0 6 - 1 02060620.fm 11.12.07/Ch,Kx...
  • Page 106: Setting Up The Tcp/Ip Protocol

    Network connections 02060038 • Position the mouse on the entry Local Area Connection. • Press the right mouse button. • In the menu that appears, select the Properties option. 6 - 2 Network T8 Control Unit – Version 2.0 02060620.fm 11.12.07/Ch,Kx...
  • Page 107 Windows 2000, tings with Advanced ...: Advanced TCP/IP Settings The previously entered IP address 192.168.0.x should already be visible on the tab labeled IP Set- tings. (see above) 02060041 Network T8 Control Unit – Version 2.0 6 - 3 02060620.fm 11.12.07/Ch,Kx...
  • Page 108: Dns Tab

    For verification purposes, the default settings are illustrated below: DNS tab: Figure 6.8: Windows 2000, Advanced TCP/IP Settings, 02060042 WINS tab: Figure 6.9: Windows 2000, Advanced TCP/IP Settings, WINS 02060043 6 - 4 Network T8 Control Unit – Version 2.0 02060620.fm 11.12.07/Ch,Kx...
  • Page 109: Options Tab

    Advanced TCP/IP Settings, Options, TCP/IP filtering 02060045 Figure 6.12: Windows 2000, Advanced TCP/IP Settings, Options, Security 02060046 • After checking all settings, to exit from Advanced TCP/IP Settings. [OK] Network T8 Control Unit – Version 2.0 6 - 5 02060620.fm 11.12.07/Ch,Kx...
  • Page 110: Setting Up File And Print Sharing

    Name service provider setting. • If the entry Client for Microsoft 02060047 Networks is not among the listed items, it has to be added via Install ... and Client. 6 - 6 Network T8 Control Unit – Version 2.0 02060620.fm 11.12.07/Ch,Kx...
  • Page 111: Defining Identifiers: Computer Names And Workgroups

    System Properties, Identification Changes • Confirm the entry with [OK] the dialog System Properties also with [OK] • Follow the restart instructions is- sued by the system. 02060050 Network T8 Control Unit – Version 2.0 6 - 7 02060620.fm 11.12.07/Ch,Kx...
  • Page 112: System-Specific Settings

    Apply to all folders option. • Click to close the dialog. [OK] 02060052 • Close all other dialogs e.g. with the shortcut [ALT]+[F4] 6 - 8 Network T8 Control Unit – Version 2.0 02060620.fm 11.12.07/Ch,Kx...
  • Page 113: Usingguest And User Accounts

    • Under Local Users and Groups select the Users directory with the left mouse button. • Move the mouse pointer to the Guest user and click the right mouse button. • In the menu, select Properties. Network T8 Control Unit – Version 2.0 6 - 9 02060620.fm 11.12.07/Ch,Kx...
  • Page 114 The guest account has been enabled. The settings have now been com- pleted and you can close the dialogs (e.g. with the shortcut [ALT]+[F4] • Continue with Section 6.3 Creating data exchange directory and enabling for network operation. 6 - 10 Network T8 Control Unit – Version 2.0 02060620.fm 11.12.07/Ch,Kx...
  • Page 115: Setting Up A User Account

    • To create the user account, under Local Users and Groups now select the Us- ers directory with the right mouse button. • In the menu that appears, select the New User... option. Network T8 Control Unit – Version 2.0 6 - 11 02060620.fm 11.12.07/Ch,Kx...
  • Page 116 As standard, the new Net-User account should already be a member of the group of users. • This can be checked by pressing the right mouse button on the user. • In the menu that appears, select the Properties option. 6 - 12 Network T8 Control Unit – Version 2.0 02060620.fm 11.12.07/Ch,Kx...
  • Page 117 Member of: window, the word Net-User Properties Users should be displayed. • The settings are correct and you can close the dialogs (e.g. with the shortcut [ALT]+[F4] 02060061 Network T8 Control Unit – Version 2.0 6 - 13 02060620.fm 11.12.07/Ch,Kx...
  • Page 118: Creating Data Exchange Directory And Enabling For

    [RETURN] mkdir c:\ZSK mkdir c:\ZSK\MUSTER A directory named ZSK and a subdirectory named MUSTER are thus created on hard disk C. • Close the MS-DOS Prompt by clicking the cross symbol at the top right of the screen.
  • Page 119 ZSK, Sharing… 02060066 • Mark the ZSK directory with the left mouse button and then click the right but- ton to start the shortcut menu. In the menu that appears, select the entry Sharing… . Network T8 Control Unit – Version 2.0 6 - 15 02060620.fm 11.12.07/Ch,Kx...
  • Page 120: Ntfs File System

    Windows NT 4.0/2000/XP Professional The ZSK Properties dialog for enabling the directory appears on the screen. De- pending on the file system used, the following display appears: 6.3.1 NTFS file system Figure 6.32: Windows 2000, zsk Properties, Sharing (NTFS) 02060067 6.3.2 FAT32 file system...
  • Page 121 • In the dialog that appears, click on the name of the desired user, on [Add] then on [OK] Figure 6.35: Windows 2000, Select Users or Groups 02060070 Network T8 Control Unit – Version 2.0 6 - 17 02060620.fm 11.12.07/Ch,Kx...
  • Page 122 Net-User as well as the User under which you have logged in on the PC. Again, these users are to be granted the full range of permissions. Then remove the user Everyone. 02060072 6 - 18 Network T8 Control Unit – Version 2.0 02060620.fm 11.12.07/Ch,Kx...
  • Page 123 Security 02060073 The ZSK directory on hard disk C can now be accessed by another PC via the net- work. This is illustrated by the change in the directory symbol in the overview of files and directories on hard disk C.
  • Page 124 Subsection have to be repeated. In this con- text also observe the remarks in Subsection 2.5 Important information and typical applications for the following sections and chapter Network operation with GiS BasePac software. 6 - 20 Network T8 Control Unit – Version 2.0 02060620.fm 11.12.07/Ch,Kx...
  • Page 125: Windows Vista Business/Enterprise/Ultimate Edition

    • In the dialog Taskbar and Start Figure 7.2: Windows Vista Menu Properties enable the op- Taskbar and Start Menu tion Classic Start menu. Properties • Confirm the dialog with [OK] 02060077 Network T8 Control Unit – Version 2.0 7 - 1 02060720.fm 11.12.07/Ch,Kx...
  • Page 126: Setting Up The Tcp/Ip Protocol

    Windows Vista erties. Network, context menu 002060080 Figure 7.4: Windows Vista, Network and Internet Network and Sharing Center 02060081 • Under Tasks select the entry Manage network connections. 7 - 2 Network T8 Control Unit – Version 2.0 02060720.fm 11.12.07/Ch,Kx...
  • Page 127 Windows Vista, vate Internet Protocol Version Local Area Connection 4 (TCP/IPv4). Properties, Networking • Then press the button in order to config- [Properties] ure the TCP/IP protocol. 02060084 Network T8 Control Unit – Version 2.0 7 - 3 02060720.fm 11.12.07/Ch,Kx...
  • Page 128 (see above). 02060086 The settings on all the other tabs are correct when the TCP/IP protocol is config- ured for the first time after Windows Vista is installed. 7 - 4 Network T8 Control Unit – Version 2.0 02060720.fm 11.12.07/Ch,Kx...
  • Page 129: Dns Tab

    Figure 7.10: Windows Vista, Advanced TCP/IP Settings, WINS 02060088 • Once you have checked all the settings, click the button to close the Ad- [OK] vanced TCP/IP Settings dialog. Network T8 Control Unit – Version 2.0 7 - 5 02060720.fm 11.12.07/Ch,Kx...
  • Page 130: Setting Up File And Print Sharing

    Name service provid- er setting. 02060089 • If the entry Client for Microsoft Networks is not among the listed items, it must be added via Install ... and Client. 7 - 6 Network T8 Control Unit – Version 2.0 02060720.fm 11.12.07/Ch,Kx...
  • Page 131: Defining Identifiers: Computer Names And Workgroups

    • In the menu select Properties. Basic information about the computer is dis- played. 02060090 Figure 7.14: Windows Vista, Control Panel, System 02060091 • Select Change settings to display the System Properties dialog. Network T8 Control Unit – Version 2.0 7 - 7 02060720.fm 11.12.07/Ch,Kx...
  • Page 132 Computer Name/ name. Domain Changes • Confirm with , close the di- [OK] alogs and follow the restart in- structions issued by the system. 02060093 7 - 8 Network T8 Control Unit – Version 2.0 02060720.fm 11.12.07/Ch,Kx...
  • Page 133: System-Specific Settings

    • Under Advanced settings dese- lect the Use Sharing Wizard (recommended) option. • Click to accept the changed [OK] setting. • Then close all other dialogs e.g. with the shortcut [ALT]+[F4] 02060096 Network T8 Control Unit – Version 2.0 7 - 9 02060720.fm 11.12.07/Ch,Kx...
  • Page 134: Usingguest And User Accounts

    02060097 • Double-click the User Accounts directory. Figure 7.22: Windows Vista, Network and Internet User Accounts 02060098 • Press the entry Turn User Account Control on or off. 7 - 10 Network T8 Control Unit – Version 2.0 02060720.fm 11.12.07/Ch,Kx...
  • Page 135 • Untick Turn on User Account Control (UAC) to make your computer more secure and close the dialog with [OK] The PC will now instruct you to carry out a restart. Network T8 Control Unit – Version 2.0 7 - 11 02060720.fm 11.12.07/Ch,Kx...
  • Page 136: Enabling/Disabling A Guest Account

    • Under Local Users and Groups select the Users directory with the left mouse button. • Move the mouse pointer to the Guest user and click the right mouse button. • In the menu, select Properties. 7 - 12 Network T8 Control Unit – Version 2.0 02060720.fm 11.12.07/Ch,Kx...
  • Page 137 The guest account has been enabled. The settings have now been com- pleted and you can close the dialogs e.g. with the shortcut [ALT]+[F4] • Continue with Section 7.3 Creating data exchange directory and enabling for network operation. Network T8 Control Unit – Version 2.0 7 - 13 02060720.fm 11.12.07/Ch,Kx...
  • Page 138: Setting Up A User Account

    • To create the user account, under Local Users and Groups now select the Us- ers directory with the right mouse button. • In the menu that appears, select the New User... option. 7 - 14 Network T8 Control Unit – Version 2.0 02060720.fm 11.12.07/Ch,Kx...
  • Page 139 • In the menu that then appears, select the Properties option. The Net-User Properties dialog appears. Under the Member of tab, in the Member of: window, the wordUsers should be displayed. Network T8 Control Unit – Version 2.0 7 - 15 02060720.fm 11.12.07/Ch,Kx...
  • Page 140 Windows Vista Business/Enterprise/Ultimate Edition: Figure 7.32: • The settings are correct and you Windows Vista, can close all dialogs (e.g. with Net-User Properties the shortcut [ALT]+[F4] 02060108 7 - 16 Network T8 Control Unit – Version 2.0 02060720.fm 11.12.07/Ch,Kx...
  • Page 141: Creating Data Exchange Directory And Enabling For

    [RETURN] mkdir c:\ZSK mkdir c:\ZSK\MUSTER A directory named ZSK and a subdirectory named MUSTER are thus created on hard disk C. • Close the MS-DOS Prompt by clicking the at the top right of [cross symbol] the screen.
  • Page 142 • In the displayed menu, select Sharing..02060112 • On the Sharing tab, click on Figure 7.37: Windows Vista, [Advanced Sharing…] zsk Properties 02060113 7 - 18 Network T8 Control Unit – Version 2.0 02060720.fm 11.12.07/Ch,Kx...
  • Page 143 • In the following dialog, click on Advanced Sharing, [Advanced…] Permissions for FRZSK 02060115 • Click on Figure 7.40: [Advanced] Windows Vista, ZSK Properties, Advanced Sharing, Permissions for FRZSK, Select Users or Groups 02060116 Network T8 Control Unit – Version 2.0 7 - 19 02060720.fm 11.12.07/Ch,Kx...
  • Page 144 • Then mark Everyone with a click on the left mouse button, and delete by clicking on the button. [Remove] • Click to exit the dialog. [OK] 02060119 7 - 20 Network T8 Control Unit – Version 2.0 02060720.fm 11.12.07/Ch,Kx...
  • Page 145 Then remove the user Ev- eryone. 02060121 The Security tab in the ZSK Properties dialog appears as follows after successful configuration: Network T8 Control Unit – Version 2.0 7 - 21 02060720.fm 11.12.07/Ch,Kx...
  • Page 146 Security 02060122 The ZSK directory on hard disk C can now be accessed by another PC via the net- work. This is illustrated by the change in the directory symbol in the overview of files and directories on hard disk C.
  • Page 147 Subsection 2.5 Important information and typical applications for the following sections and chapter Network operation with GiS BasePac software and on Subsection 3. Network operation with GiS BasePac software. Network T8 Control Unit – Version 2.0 7 - 23 02060720.fm 11.12.07/Ch,Kx...
  • Page 148 Windows Vista Business/Enterprise/Ultimate Edition: 7 - 24 Network T8 Control Unit – Version 2.0 02060720.fm 11.12.07/Ch,Kx...
  • Page 149: Windows Vista Starter/Home Basic/Home Premium

    The required settings are likely to be similar to those with the Win- NOTE dows Vista Professional Editions. Try the settings described in Chapter 7. Windows Vista Business/Enterprise/Ultimate Edition:, with the restriction that only one guest account should be used. Network T8 Control Unit – Version 2.0 8 - 1 02060820.fm 11.12.07/Ch,Kx...
  • Page 150 Windows Vista Starter/Home Basic/Home Premium 8 - 2 Network T8 Control Unit – Version 2.0 02060820.fm 11.12.07/Ch,Kx...
  • Page 151: Appendix A: Options For Network Operation (T8)

    (T8) Using last network connection By way of a setting in the T8 control unit, you can choose always to use the most recently used network connection. This option has the effect that the Network Connections dialog does not appear on the T8 control unit each time you would like to access the network.
  • Page 152 Appendix A: Options for network operation (T8) Figure A.2: T8 control unit, software/hardware settings 02060032 • Press [R4] Software settings Figure A.3: T8 control unit, Software settings 02060033 • Press [L6]/[R6] Select network connection A - 2 Network T8 Control Unit – Version 2.0...
  • Page 153 Appendix A: Options for network operation (T8) Figure A.4: T8 control unit, network mode options 02060034 • Press [L2]/[R2] Use last network connection The selected option Use last network connection now appears in the Software settings dialog. Figure A.5: T8 control unit,...
  • Page 154 Appendix A: Options for network operation (T8) A - 4 Network T8 Control Unit – Version 2.0 02060A20.fm 11.12.07/Ch,Kx...
  • Page 155: Appendix B: Network Setup (Brief Overview)

    Share directory 2.5 and C:\ZSK Share name 2.5 and FRZSK (for directory) Share permission 2.5 and Net-User (for directory) Network connection via: Server GISPC 3.1.2 3.2.1 \\Server\SharedDirectory \\GISPC\FRZSK Network T8 Control Unit – Version 2.0 B - 1 02060B20.fm 11.12.07/Ch,Kx...
  • Page 156 Appendix B: Network setup (brief overview) B - 2 Network T8 Control Unit – Version 2.0 02060B20.fm 11.12.07/Ch,Kx...
  • Page 157: Appendix C: Use Of Domains

    From T8 Software Release 02.07.2007a onwards, the use of domains is facilitated by the T8 control unit. In the Network user name input box of the T8 control unit [Chapter 2.3 T8 control unit settings] a domain user can now also be stated. The domain user and the associated domain inputs must not exceed 25 characters.
  • Page 158 Appendix C: Use of domains C - 2 Network T8 Control Unit – Version 2.0 02060C20.fm 11.12.07/Ch,Kx...
  • Page 159: Appendix D: Limited Server Functionality

    In T8 Software Release 02.07.2007a and later versions, a limited server functionality is supported by the T8 control unit. With the GiS software, designs can be loaded directly to the memory of the T8 control unit [Chapter 3.1 Normal operation]. However, themonogram machine mode is available only in the conventional way [Chapter 3.2 Automatic mode,...
  • Page 160 Appendix D: Limited server functionality Supplementary settings on the T8 control unit Figure D.1: T8 control unit, machine basic screen 02060126 • To arrive at the depicted Network setupmenu, press the [L7] Software/ hardware settings key in the basic screen and then the [R3] Network setup key [Chapter 2.3 T8 control unit settings].
  • Page 161 \\192.168.0.1\ZSK\MUSTER whereby 192.168.0.1 stands for the IP address of the T8 control unit. The designs can now be loaded directly to the memory of the T8 control unit [Chapter 3.1.1 Saving designs in the data exchange directory] with the GiS software.
  • Page 162 Appendix D: Limited server functionality D - 4 Network T8 Control Unit – Version 2.0 02060D20.fm 11.12.07/Ch,Kx...
  • Page 163: Appendix E: Troubleshooting Supplement

    Figure E.1: Further tips: Windows XP, Local Area Connection • In the Local Area Connection Properties Properties dialog, deselect the QoS Packet Scheduler option (Windows later versions). 00490612 Network T8 Control Unit – Version 2.0 E - 1 02060E20.fm 11.12.07/Ch,Kx...
  • Page 164 Appendix E: Troubleshooting supplement If only Monogram machine automatic mode is not working, and there is an empty ZSK directory on the PC: • Delete the files zsk. ini and zsk_ini. dis. E - 2 Network T8 Control Unit – Version 2.0...
  • Page 165 2 - 37 2 - 27 GiS software 2 - 4 network test 2 - 2 App. E - 1 RJ45 cables 2 - 2 terminating resistors 2 - 27 Network T8 Control Unit – Version 2.0 Index - 1 02060t20MIX.fm 11.12.07/Ch...
  • Page 166 2 - 14 operating modes setup 1 - 1 networking 1 - 3 PC specification 1 - 5 settings 2 - 7 special configurations 2 - 18 Index - 2 Network T8 Control Unit – Version 2.0 02060t20MIX.fm 11.12.07/Ch...
  • Page 167 Manage 6 - 9 guest account 7 - 10 6 - 11 Guest Properties (dialog) 7 - 13 MS-DOS Prompt 6 - 14 IP address 7 - 4 Network T8 Control Unit – Version 2.0 Index - 3 02060t20MIX.fm 11.12.07/Ch...
  • Page 168 DNS (tab) 5 - 4 enabling file sharing 5 - 13 enabling ZSK directory 5 - 12 file sharing 5 - 13 Guest account, enabling 5 - 10 Index - 4 Network T8 Control Unit – Version 2.0 02060t20MIX.fm 11.12.07/Ch...
  • Page 169 Index Network T8 Control Unit – Version 2.0 Index - 5 02060t20MIX.fm 11.12.07/Ch...
  • Page 170 Index Index - 6 Network T8 Control Unit – Version 2.0 02060t20MIX.fm 11.12.07/Ch...

Table of Contents