Fan Motor U; Shelf; Ceiling Plate; Antenna - Panasonic NE-1878BPQ Service Manual

7.7.

Fan motor U

1. Remove the cabinet and back panel.
(Refer to "7.1.Cabinet, back panel")
2. Remove the connector of the fan motor U.
3. Unhook the lead wire from the hook and holder.
4. Remove fan motor U.
(White arrow: 1 screw, black arrow: 1 screw)
• Push the fan motor U toward the bottom (tilted arrow A)
and tilt it to the side (tilted arrow B) to remove it.
7.8.

Ceiling plate

1. Remove the ceiling plate.
• Pull the ceiling plate stopper located on the left and right
sides of the ceiling plate toward inside until disengaged.
• When installing, align the 3 protrusions on the back, and
then engage the hooks on both sides.
7.9.

Shelf

1. Remove the cabinet.
(Refer to "7.1.Cabinet, back panel")
2. Remove the shelf.
• In the screw-driver insertion hole located at the left of the
oven, insert a screw-driver and press-down the handle to
shelf
lift up the .
(Hole diameter approx. 8mm)

7.10. Antenna

7.10.1. Antenna (Upper)
1. Remove the ceiling plate.
(Refer to "7.8.Ceiling plate")
2. Remove the antenna. (Plasti-rivet C: 2 pieces)
7.10.2. Antenna (Lower)
1. Remove the shelf.
(Refer to "7.9.Shelf")
2. Remove the antenna
35
(lower)
. (Plasti-rivet C: 2 pieces)