How To Erase Self-Diagnosis Memory; How To Cancel ”Filt” Sign In The Display; How To Cancel ”Rfl” Sign In The Display - Panasonic NE-1878BPQ Service Manual

5.2.

How to erase self-diagnosis memory

• Memory of self-diagnosis cannot be erased by turning OFF the power.
• By "How to erase self-diagnosis memory (1)" , self-diagnosis memory of "F 97", "F 98", "FE 7" and "FE 8" cannot be erased.
In this case, erase the memory of self-diagnosis by "How to erase self-diagnosis memory (2)" .
lHow to erase self-diagnosis memory (1) (when error code other than "F 97", "F 98", "FE 7" or "FE 8" is displayed)
1. Door open.
2. Press "Start" key and "8" at the same time to display self-diag-
nosis.
3. While the display is shown, press "Pause/Cancel" to erase the
memory of self-diagnosis.
lHow to erase self-diagnosis memory (2) (when error code "F 97", "F 98", "FE 7" or "FE 8" is displayed)
1. Door open.
2. Press "Start" key and "8" at the same time to display self-diag-
nosis.
3. While the display is shown, press "Pause/Cancel" to erase the
memory of self-diagnosis.
5.3. How to cancel "FILt" sign in the display
• "FILt" sign in the display cannot be cancelled by turning OFF the power.
• Pressing "Pause/Cancel" key generates short beep tone and the "FILt" sign disappears but cannot be cancelled.
Use the following method to cancel the "FILt" sign.
1. Door is closed condition.
2. Keep pressing "Pause/Cancel" key for 2 seconds.
5.4. How to cancel "rFL" sign in the display
• "rFL" is displayed if the ceiling plate is removed.
• Place the ceiling plate securely. The oven is inoperative without it.
1. Ceiling plate is removed.
2. Place the ceiling plate securely.
Procedure
Procedure
Procedure
Procedure
Display
0
F33 0000
(Example)
been occurred yet.
0
Display
0
F98 0000
(Example)
been occurred yet.
0
Display
0
"FILt" sign is cancelled.
Display
0
"rFL" sign is cancelled.
19
Remarks
is displayed if any error have not
Remarks
is displayed if any error have not
Remarks
Remarks