Disconnecting A Bluetooth® Device; Reconnecting A Previously Connected Device; Scrolling Through Other Paired Devices; Clearing The Headphone Memory - Bose SOUNDLINK Owner's Manual

O P E R AT I O N O P E R AT I O N
Disconnecting a Bluetooth
• Turn off the Bluetooth® feature on your device.
• If your mobile device supports NFC, tap the NFC touchpoint on your mobile device to
the center of the right earcup. Tap again to reconnect.

Reconnecting a previously connected device

When powered on, the headphones will automatically try to reconnect with the two
most recently connected devices. Make sure the device(s) are within range and powered
on.

Scrolling through other paired devices

To play music from a device in the headphone memory that is not currently
connected:
1. Slide all the way up to the
currently connected.
2. Within two seconds, slide
connect to the next paired device.
3. Repeat step 2 until you hear the correct device name.
Note: To use this feature, voice prompts must be on. (See "Turning voice prompts
off/on" on page 12.)
Note: If a device is not within Bluetooth range (30 ft. or 9 m), scroll to the next
device.

Clearing the headphone memory

To clear the headphone memory of all devices:
1. Slide all the way up to the
"Bluetooth device list cleared."
2. Delete Bose AE2 SoundLink from the Bluetooth list on your mobile device.
All Bluetooth devices are cleared and the headphones are ready to pair.
1 6 - E N G L I S H
device
®
symbol and release to hear which device(s) are
all the way up to the
symbol and hold for ten seconds, until you hear
symbol and release again to