Tuner Step Change Mode; Osd Update Mode - Denon AVR-S530BT Service Manual

3-2. Tuner Step Change Mode

3-2.1. Actions
Switches the tuning frequency of the tuner.
3-2.2. Starting up
AVR-S530BT
· While the power is On, hold down buttons "SOUND MODE 1 ", "TUNER PRESET CH-" and "TUNER
PRESET CH+" for at least 3 seconds.
Displays " TUNER: " using the "TUNE +" button.
AVR-X540BT
· While the power is On, hold down buttons "TUNER PRESET CH+", "TUNE -" and "TUNE +" for at
least 3 seconds.
Displays " TUNER: " using the "STATUS" button.
3-2.3. Displays
Pressing the button each time switches the display shown as follows.
TUNER:AM9/FM50
AVR-S530BT : "TUNER PRESET CH+" or "TUNE -"
AVR-X540BT : "TUNER PRESET CH+" or "DIMMER"
TUNER:AM10/FM200
AVR-S530BT : Enter using the "TUNER PRESET CH-" button.
AVR-X540BT : Enter using the "TUNE -" button.
The display then returns to normal mode.
b The step frequency of the tuner is not initialized during initialization.

3-3. OSD Update Mode

This is not used during servicing. Do not use
3-3.1. Operations
Exit the OSD Update mode
Remove the power plug to exit this mode.
OSD Update:Off
70