Bosch GKF125CE Operating/Safety Instructions Manual page 20

2610052572_GKF125CE 9/18/18 12:11 PM Page 20
▶ Deluxe Router Guide
(Not included, available as accessory)
The Bosch deluxe router guide is an
optional accessory that will guide the
router parallel to a straight edge or
allow you to create circles and arcs.
The deluxe router guide is supplied
with two rods and screws to fasten
the guide (Fig. 24). In addition, it
features a fine adjustment knob and
indicator for accurately positioning the
edge guide relative to the bit. With the
guide installed and adjusted, the
FIG. 24
BASE
WORKPIECE
▶ Template Guides
This plunge base can also be used
with the optional Bosch-exclusive
quick-change template guide system,
which firmly grips the guides with a
spring-loaded ring. Unlike conven -
tional threaded template guides,
there is no threaded ring that can
come loose while routing (Fig. 25).
▼ INSTALLING TEMPLATE GUIDE
ADAPTER
(Not included, available as accessory)
Place template guide adapter over the
holes in the center of the sub-base,
and align the two threaded holes in
the bottom of adapter with the
countersunk holes in subbase. Fasten
adapter with the screws provided.
Operating Instructions
CUT
DESIRED
WIDTH
router should be fed normally, keeping
the guide in contact with the edge of
the workpiece at all times. The deluxe
router guide may also be positioned
directly under the router base for
operations where a cut is needed
close to or at the edge of the work.
The deluxe router guide includes a
dust extraction hood and the VAC002
vacuum hose adapter.
For complete
installation and operation, please
refer to the instructions which are
included with this accessory.
FEED
DIRECTION
FINE ADJUSTMENT
KNOB
FIG. 25
20
instructions on
M6 WING SCREW
FINE
ADJUSTMENT
INDICATOR
ROUTER
GUIDE RODS
TEMPLATE
GUIDE ADAPTER
TEMPLATE GUIDE
RELEASE LEVER
TEMPLATE GUIDE
(optional accessory)
FIG. 26
TEMPLATE GUIDE
ADAPTER
(optional accessory)
MOUNTING SCREWS