Ikelite 2601.03 Instruction

I n s t r u c t i o n s f o r
2601.03 Steady Tray for GoPro
2601.11 Pistol Grip Handle
9531.3 (left) and 9531.4 (right) Release Handles
2601.03 Steady Tray for GoPro
The Steady Tray for GoPro is precision machined out of aircraft grade aluminum and features military-grade
anodizing. Each Tray comes with a GoPro Tripod Mount Base attached. This allows easy attachment of your
GoPro housing. A 1/4-20 threaded hole is provided on the bottom of the Tray to attach a standard Tripod.
Slide the GoPro Mounting Tabs into the GoPro Tripod Mount Base and tighten with your GoPro
Mounting Bolt.
Diagram A
GoPro Housing and Camera
(not included)
GoPro Mounting Tabs
0478.01 GoPro Tripod
Mount Base (included)
2601.11 Pistol Grip and 9531.3 (left) / 9531.4 (right) Release Handle(s) for Steady Tray
6201.11 Pistol Grip attachment: (see Diagram B, Page 2)
1. Push Pistol Grip Mount into tray recess on bottom side of Tray.
2. Slide Nylon Washer onto 1/4-20 X 3/8" Slotted Screw.
3. Tighten Slotted Screw firmly with a flat head screwdriver.
9531.3 (left) and 9531.2 (right) Release Handle(s) attachment: (see Diagram B, Page 2)
1. Line up Handle Guide Pin with Guide Pin Tray Hole and insert handle into Tray. Note: Push Button should
extend toward the back of the Tray.
2. Slide Nylon Washer onto 1/4-20 X 5/8" Slotted Screw.
3. Tighten Slotted Screw firmly with a flat head screwdriver. Bottom of Handle should be flush against Tray.
GoPro
2601.03 Steady Tray for GoPro
GoPro Mounting Bolt
(not included)