Advertisement
STEP 4
INJECT YOUR
DOSE
Use the injection method you learned from
your treating healthcare professional.
1. Lightly pinch a fold of skin and insert the
needle straight into the pinched skin.
2. Deliver the dose by pressing the injection
button all the way in. The number in the dose
window will return to "0" as you inject.
3. Keep the injection button pressed in and
slowly count to 10. Then withdraw the
needle from the skin.
10 secs
Insulin keeps coming out for a short while
after you have pressed the injection button in,
so keep it pressed for 10 seconds before
you withdraw the needle from your skin to
make sure you get your full dose.
Please click here or visit:
http://products.sanofi-aventis.us/lantus/lantus.html
11
for Additional Important Information.
STEP 5
REMOVE THE
NEEDLE
Remove the needle after each injection and
store the Lantus
SoloStar
®
needle attached. This will help prevent
contamination, infection, air in the insulin
reservoir, and insulin leaks.
1. Replace the outer needle cap.
2. Unscrew the needle from the pen.
3. Dispose of the needle safely as instructed
by your treating healthcare professional.
4. Put the pen cap back on and store the pen
until your next injection.
pen without a
®
12
Advertisement
