G4S S680 Installation And User Instructions

Installation and User Instructions for S680 & S690 Readers
The S680 and S690 readers are
readers that are capable of reading HID format card,
with LED's. The readers use
communications.
For additional information regarding the installation,
configuration and proper use of this product please
refer to:
M2150 Design Guide, P/N 9600-0420 Issue 1.6.4 or
later and SMS Software User Guide, P/N 9600-0429
Issue 7.0.4 or later.
Mount the Reader
1
Mount the backplate using
countersunk headed screws
adjacent to the opening edge
of the door.
2 Reader Connections
Note: (For UL Listed Products)
1). Consult local AHJ (Authority Having Jurisdiction) when installing access control readers and locking
mechanisms to any portal in an egress path.
2). The use of Fail Closed / secure configuration shall be determined by local building codes and the
local AHJ.
3). Wiring methods shall be in accordance with NEC (National Electrical Code) ANSI/NFPA 70.
4). All Interconnected devices must be UL listed.
5). For UL294 Installations the S680 and S690 Readers have only been determined compatible to be
used with the M2150 Series Control and Elevator Units.
125kHz proximity card
®
20mA current loop
You should find that the
backplate has holes for
connection to most standard
electrical back boxes.
You can remove the front cover by
easing it off gently with a screwdriver
at this point