ASROCK Z930 EXTREME4 User Manual page 74

Command Tristate
Configure the Command Tristate Support.
Exit On Failure
Configure the Exit On Failure for MRC training steps.
Reset On Training Fail
Reset system if the MRC training fails.
MRC Fast Boot
Enable Memory Fast Boot to skip DRAM memory training for booting faster.
Voltage Configuration
CPU Core/Cache Voltage
Configure the voltage for the CPU Core/Cache.
CPU Load-Line Calibration
CPU Load-Line Calibration helps prevent CPU voltage droop when the system is
under heavy load.
GT Voltage
Configure the voltage for the GPU.
GT Load-Line Calibration
GPU Load-Line Calibration helps prevent GPU voltage droop when the system is
under heavy load.
DRAM Voltage
Use this to configure DRAM Voltage. The default value is [Auto].
DRAM Activating Power Supply
Configure the voltage for the DRAM Activating Power Supply.
PCH +1.0 Voltage
Configure the chipset voltage (1.0V).
VCCIO Voltage
Configure the voltage for the VCCIO.
68