Section 4 - Wireless Security
Using the D-Link Wireless Connection Manager
1. Open the Wireless Connection Manager by double-clicking on the D-Link
icon on your desktop. Click on New
2. Select
TKIP or AES.
3. Click on
4. Next to EAP Type, select
Authentication Protocols allow devices on the network to request
authentication from the RADIUS server in the network. All the devices
on the network must use the same EAP type when using a RADIUS
server for authentication. Some RADIUS servers require that the Validate
validation.
5. Select an
6. Enter the login information required to authenticate.
7. Click Add to enter the IP address(es) of your RADIUS servers.
8. Click OK to save your settings.
D-Link DWA-131 User Manual
Configure WPA/WPA2 (RADIUS)
.
under Set Security Option and then select
to continue.
,
from the drop-down menu.
, or PEAP. Extensible
38