1. INTRODUCTION You just acquired a MIXPRO 14 continuous mixer and all the team of Europe Projection thanks you for the confidence you have granted us. Manufacturer of professional equipments for paint and fillers, we have put our know-how for 20 years at the service of the users of our machines.
- people in charge of the transport of the machine - people in charge of the use of the machine - people in charge of the cleaning and maintenance of the machine - people in charge of the final destruction of the machine 201809-321-ENG User manual - MIXPRO 14...
After-Sale Service to put genuine parts instead of the defective ones. • In case of needed After-Sale Service, always specify the machine model and its serial number. • For any replacement of parts, only use genuine parts. User manual - MIXPRO 14 201809-321-ENG...
Page 7
After every use, necessarily grease the pump with a mixture of water + storage liquid to avoid it blocking up. The storage of a not greased pump can damage it seriously. IN CASE OF NECESSITY, WE SAVE OURSELVES THE RIGHT TO MAKE ANY USEFUL MODIFICATION WITHOUT ADVANCED NOTICE. 201809-321-ENG User manual - MIXPRO 14...
Antony (92) or Rousset sur Arc (13). Upon receipt, the products are sorted by our employees and directed to the most appropriate processing channels. For any further information, please contact our hotline to conseil@euromair.com or +33 (0) 4 42 29 08 96. User manual - MIXPRO 14 201809-321-ENG...
- a mixing tube cleaning part - an unplugging key - two cleaning balls Ø30 - a mixing tube cleaning part - a mounting spray for rotor/stator - a mounting spray for rotor/stator - a spray lance 201809-321-ENG User manual - MIXPRO 14...
L Insert for wire controlled remote control E Quick connector M Commande panel (see details on next page) F Water outlet valve N Safety grid G Water flow-rate regulation valve O Rotor / stator pump H Drain valve User manual - MIXPRO 14 201809-321-ENG...
Page 11
Light on: product pump is working in reverse mode Light on = pump is working with water / Light off = pump is working without water Emergency stop Product pump motor display Water flow-rate display 201809-321-ENG User manual - MIXPRO 14...
When the (L6) light is on, the machine is in continuous mixing mode with water (for powder products). • When the (L6) light is off, the machine is in "without water" mode (for pastrous products). User manual - MIXPRO 14 201809-321-ENG...
5. USE OF THE MACHINE (continued) 5.2. START-UP OF MIXPRO 14 FLOOR SCREED VERSION 1. Spray uniformly the lubricant (white spraying can) onto the rotor. Mount the rotor with help of the crank and the straight axis (A) by turning it clockwise, until the rotor is mounted to its maximum.
5. USE OF THE MACHINE (continued) 5.3. START-UP OF MIXPRO 14 PLASTER VERSION 1. Spray uniformly the lubricant (white spraying can) onto the rotor. Mount the rotor with help of the crank and the straight axis (A) by turning it clockwise, until the rotor is mounted to its maximum.
5. USE OF THE MACHINE (continued) 5.4. START-UP OF MIXPRO 14 AIR INSULATION VERSION 1. Spray uniformly the lubricant (white spraying can) onto the rotor. Mount the rotor with help of the crank and the straight axis (A) by turning it clockwise, until the rotor is mounted to its maximum.
If the problem persists or if in doubt about the correct working of the machine, do not try to repair the machine yourself or to dismantle it. Contact an authorized After-Sale Service or our hotline on : +33 (0) 4 42 29 08 96. User manual - MIXPRO 14 201809-321-ENG...
Proceed by simply cleaning with a humid sponge. 23. Clean the accessories. 24. Open the drain valve (H) and the water outlet valve (F). 201809-321-ENG User manual - MIXPRO 14...
Any action of the customer against us relative to the warranty of the equipments will be prescribed to the deadline of 1 year from the day of the discovery of the cause of the action. 201809-321-ENG User manual - MIXPRO 14...
Page 23
The guarantee does not cover parts which, because of their specific use, are subject to wear and tear. If the identified defects could not be attributed to our liability, costs will be charged to the buyer. MODEL : MIXPRO 14 continuous mixer SERIAL NUMBER :...
Page 24
EUROPE PROJECTION - 228, avenue Olivier Perroy 13790 ROUSSET Tél : +33 (0)4 42 29 08 96 – Fax : +33 (0)4 42 53 44 36 SAS au capital de 400 000€ - SIREN 394 961 510 – NAF 2892 Z User manual - MIXPRO 14 201809-321-ENG...
Need help?
Do you have a question about the MIXPRO 14 and is the answer not in the manual?
Questions and answers