IndigoVision XP Quick Start Manual

I V
NDIGO ISION
XP HD PTZ C
AMERA
BX R
ANGE
Q S G
UICK TART UIDE
Document ID: IU-PTZ-MAN014-1
C © I V L . A .
OPYRIGHT NDIGO ISION IMITED LL RIGHTS RESERVED
I NDIGO V ISION IS A TRADEMARK OF I NDIGO V ISION L IMITED AND IS
. SMS4, C G
REGISTERED IN CERTAIN COUNTRIES AMERA ATEWAY
M C
AND OBILE ENTER ARE UNREGISTERED TRADEMARKS OF
I NDIGO V ISION L IMITED . A LL OTHER PRODUCT NAMES REFERRED TO
IN THIS MANUAL ARE TRADEMARKS OF THEIR RESPECTIVE OWNERS
THIS MANUAL IS PROVIDED WITHOUT EXPRESS REPRESENTATION
/ .
AND OR WARRANTY OF ANY KIND
P LEASE CONTACT I NDIGO V ISION L IMITED ( EITHER BY POST OR BY E
. @ . )
MAIL AT PARTNER SUPPORT INDIGOVISION COM WITH ANY
/
SUGGESTED CORRECTIONS AND OR IMPROVEMENTS TO THIS
MANUAL .
C A
ONTACT DDRESS
C D H ,
HARLES ARWIN OUSE
E T ,
DINBURGH ECHNOPOLE
E , EH26 0PY, UK
DINBURGH
F
URTHER INFORMATION
F OR FURTHER INFORMATION , SEE THE U SER G UIDE :
Y :
OU CAN DOWNLOAD A COPY FROM
. . / - - -
WWW INDIGOVISION COM XF HD PTZCAMERA QUICKSTARTGUIDE
A , QR .
LTERNATIVELY SCAN THE CODE BELOW
P
ACKAGE CONTENTS
334
260
M 25 CABLE
ENTRY
C
ONNECTIONS
,
.
-
Camera
512
• 1 x M25
• Flexible Conduit (ATEX, IECEx and INMETRO models only)
• Cable Bundle (UL and CSA models only)
475
Additional items
• Sunshield and fixings
• IndigoVision logo stickers for sunshield
• Envelope containing ATEX Technical Manuals and wiring
Ø11
diagrams
Ø21 0
Ø18 2
Pin connections
1 Pin number Type
2
1 CAT5 Multicore
3
4
2 Green/Yellow
5
3 Blue
6
4 Brown
5 Violet
6 Yellow
S
AFETY INFORMATION
Warning
Ensure the power supply is switched off during installation.
When installing the camera, fasten it securely to the surface. A falling
camera may cause personal injury.
Caution
Only install in suitable environments. For more information, see the Atex
Technical Manuals.
Handle the camera with care so the main electronics and components
are not damaged.
For security reasons, you must change the camera's default username
and password.
Ensure each camera has a unique IP address.
Notices
Use only hex socket head fasteners with property class of A4-70
for securing end covers and shafts to housing.
Read this guide before installing the camera.
R
EGULATORY
Regulatory information is marked on the silver regulatory label
applied to rear face of the camera. The regulatory approvals
Description
applied to the camera include one or more of the following
standards:
Ethernet connection
• EN60079-14:2008
Earth
• IEC60079-14:2007
24V AC (120W/5A) Common
• UL1203 (2006)
• UL 60065 (Edition 7)
24V AC (120W/5A) Live
• CAN/CSA-22.2 No 60065-03 (2012)
24V AC Output for water pump
• CAN/CSA-22.2 No 30 M1986 (2012)
24V AC Pump Common
• CAN/CSA-22.2 No 25-1966 (2009)
• INMETRO
• No modifications must be made to the flamepaths of the unit
without consultation of the drawings listed.
• Temperatures could exceed 70
at the branching point, suitably rate cable must be selected.
• No electromagnetic or ultrasonic radiating equipment to be
fitted into the enclosures. However, a fibre optic transmitter
may be fitted, the output from which must always be routed
out of the enclosure via armoured cable or conduit and must
be terminated within a suitably certified enclosure or in a safe
area.
• A routine overpressure test in accordance with IEC 60079-
1:2007 Clause 16.1 shall be carried out on all enclosures,
Including all cemented window assemblies, at a pressure of
27.3 Bar for a period of between 10 and 60 seconds and must
be recorded. There shall be no deformation or damage to the
enclosures and no leakage through the cement of any of the
window assemblies.
0 0
C at the cable gland or 80 C