Volume; Reset All; System Info; Hard Reset - SanDisk Sansa Express c200 User Manual

Volume

1) Press Menu button to return to the Main Menu.
2) Move down to Settings and select it.
3) Select Volume.
4) Highlight the desired volume settings then press Select button.

Reset All

To reset the Sansa Express™ device to its original factory settings, please execute
the following steps:
1) Press Menu button to return to the Main Menu.
2) Move to Reset All and select it.
3) Select Save to reset to factory settings or Cancel to stop the reset.

System Info

To display information regarding the Sansa Express™ (such as firmware rev,
available memory, number of songs loaded, etc...), please execute the following
steps:
1) Press Menu button to return to the Main Menu.
2) Move to System Info and select it.

Hard Reset

To perform hardware reset on the Sansa Express™ device, press and hold the Select
button while pressing the Volume Up (+) buttons simultaneously.
12