Ross 1000 Series Operating Instructions

Ross 1000 Series Operating Instructions

Biometric safe lock super code

Advertisement

1000-Series Biometric Safe Lock

Super Code Operating Instructions

The Super Code

Please find attached the super code assigned to this unit.
This code should be retained in a secure location.
This code is used :-
As an emergency override code to open the Ross 1000-Series
Biometric Safe Lock.
It can also be used to delete all enrolled fingerprint/password
data contained on this unit.
To link the entry pad and the safe lock together. Encrypted data
is loaded from the entry pad to the safe lock to protect against
illegal entry. The safe lock and the entry pad must have the
same super code encryption or the unit will not work.

Recommendation in the use of the Super Code

It is recommended that a database be maintained that lists the
relevant client information, serial number of the unit and it's
assigned super code.
It is recommended that a unique identifiable serial number be
assigned to the unit. Via the database, the safe's serial number
then identifies the super code that has been assigned. Each
entry pad should also be labelled with this serial number for
identification and traceability reasons.
It is recommended that only authorized administrators manage
this database. Records need to be kept of when a super code
inquiry was made, and who required access to this information.
Most importantly,
Your database needs to record any change in the link
between the super code and the unit's serial number. If
this link is lost or the super code has been lost, super code
access is not possible. A new entry pad would need to be
installed. The replaced entry pad would also need to be
returned for re-programming of a new factory set super
code.
It is not recommended that an end-user be provided with
the super code.
Database Example –
Serial#
User Name
Contac
t
Supe
Details
Code
100001
AB
C
Jam
es
621820671
Locksmith
s
Bigl
e
y
100002
XYZ
Robe
rt
420987317
SecuritySafe s
Henry
Super Code operating instructions
Getting Started – Using the Super Code.
Using the cable supplied, connect the entry pad and the
safe lock as directed in the User Manual.
Install the battery into the entry pad. An
display screen indicates a communication error has been
detected. In this case, re-check the cable connections. If
the error remains, push the reset button on the lock to
reset the link between the entry pad and the safe lock. If
the error persists, contact your supplier for further advice.
Enter the super code assigned to this unit. If the
verification is successful, the LED on the display screen
flashes 'green' and the display screen will list slot #
(2) beeps sound to indicate the handle on the door can be
turned to open the safe.
To change this unit's Super Code.
You need to ensure that your database records are updated to
reflect the change in this unit's Super Code.
CAUTION:
instructions are performed with the safe door open.
Prepare the new Super Code (re: between 10 & 14 digits).
Enter the existing Super Code and wait for the verification to
complete. If successful,
The display screen LED is illuminated 'green' in colour and (2)
r
Inquir
y
audible beeps sound to indicate the handle can now be turned
Date
to open the safe door.
1
20/4/0
8
To initiate the process to change this unit's Super Code, press
and hold
4
invitation to enter the new Super Code.
Enter the new Super Code (re: between 10 & 14 digits), and
press and hold
point,
is the request to verify the entered Super Code.
Re-enter the Super Code and press and hold
listed on the display screen. This unit now has a new Super
error listed on
Code assigned. Update your database records accordingly.
Please note, if the entered and re-entered Super Code do not
match, the display screen will list
Code change has been unsuccessful. Simply enter, and re-
enter the revised Super Code again, as directed.
.
It is recommended that the following
will be listed on the display screen.
until the display screen lists
. This is the
until the display screen lists
. At this
until
indicating the Super
,
is

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 1000 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Ross 1000 Series

  • Page 1 • Enter the existing Super Code and wait for the verification to Database Example – • As an emergency override code to open the Ross 1000-Series complete. If successful, will be listed on the display screen. Biometric Safe Lock. The display screen LED is illuminated ‘green’ in colour and (2)
  • Page 2 To delete ALL enrolled fingerprints and passwords. Have an entry pad available that has been assigned a Super • Code that matches the faulty unit. With this – Enter the assigned Super Code and wait for the verification process to complete. is listed on the display screen, the Options: Verify that the safe lock works by connecting this new display screen LED is illuminated ‘green’...

Table of Contents