Table of Contents
Advertisement
110-1061.qxd
3/27/03
INSTALLER settings (continued)
RESIDUAL COOL
SECONDS DELAY
60
INSTALL MENU
SELECT
AUTO CHANGEOVER
DISABLE
ENABLE
INSTALL MENU
SELECT
ENERGY EFFICIENT
RECOVERY
DISABLE
ENABLE
USER MENU
SELECT
10:47 AM
Page 20
RESIDUAL COOL
In order to get greater efficiency from the cooling system, the fan can be programmed to run for
0 (OFF), 30, 60, 90, or 120 seconds after the air conditioner has shut off.
AUTO CHANGEOVER
When turned on, the thermostat will switch automatically between heating and cooling to maintain
the optimal temperature in your home.
ENERGY EFFICIENT RECOVERY
When turned on, the thermostat will look up to two hours before the next event and anticipate when
to turn on to reach the desired temperature.
(Black plate)
20
Advertisement
Table of Contents
