Source Setup; Connecting Your Speaker To Bluetooth - Harman Kardon OMNI BAR+ Owner's Manual

Source Setup

The final step to set up your Omni Bar+ or Omni Adapt+ is to configure the
Source setup
external sources. For each source, HDMI TV, Optical, or AUX-in, you will select
To optimize your listening
experience, please select how
how you plan to use this source.
you will use each input source
on your Omni Bar+
HDMI input is for:
If you are not using this source, select "Not used."
Watching movies and TV shows
If you select "Watching movies and TV shows," then this input will have very
Not used
little delay and good lip sync with the TV for video applications. But you won't
Optical input is for:
be able to restream this input source to other Omni speakers in your house.
Watching movies and TV shows
Listening to music
If you select "Listening to music," then you will be able to restream this input
Not used
What does it mean?
to other Omni speakers in your house. Bus an additional delay will be added
OK
for stability, which will be unsuitable for video applications.
You can change these settings later by going to Settings > Manage Rooms. Find the room you wish
to change, select it, and then select Source setup. You will be taken through this step again and have
the chance to reconfigure the inputs.
After this step, room setup is complete. You may now set up additional rooms through the same
process, or start streaming music.

Connecting Your Speaker to Bluetooth

>3s
in the same group. Stereo audio will automatically be sent to the front left, front right, surround left,
and surround right speakers in a wireless 5.1 system, and you can send the audio around the house
by grouping rooms in the Controller app or by pressing the Link button.
You only need to pair once with each speaker you wish to stream to via Bluetooth. After initial pairing is
done, you only need to select the speaker in your phone or tablet's Bluetooth settings menu to reconnect.
When streaming Bluetooth audio, the Link button LED will turn blue.
The Omni Bar+ and Omni Adapt+ are is equipped with Bluetooth,
which allows audio streaming from any app on your phone
or tablet. To pair your phone or tablet make sure the speaker
is fully powered on, then press the Bluetooth button on the
top of the Omni Bar+ or remote control or the Source button
on the top of the Omni Adapt+ for 3 seconds. The Link button
on the top of the speaker will begin to flash blue. Find the
speaker in your phone or tablet's Bluetooth settings menu,
and select it to pair.
HK OMNI BAR+
Once paired, all the audio from your phone or tablet will be
wirelessly streamed to your speaker and all the other speakers
22