Pairing Button
Your Omni Bar+ comes from the factory already paired with the wireless subwoofer. If you ever need
to reconfigure or replace your Omni Bar+ or wireless subwoofer, you can connect them again by
pressing this button on both the Omni Bar+ and the wireless subwoofer. The LEDs will begin flashing
quickly, and after 30 seconds the connection will be complete.
Optical Out Connector
Connect the Omni Adapt+ to a receiver or amplifier using an optical cable for the highest quality
digital audio connection.
Audio Out Connector
Connect speakers or an amplifier here via a 3.5mm stereo cable if your external device doesn't
support optical audio.
Subwoofer Out Connector
Connect an active subwoofer to the Omni Adapt+ using an RCA audio cable.
Crossover Adjustment
Use this to adjust the crossover frequency of the Omni Bar+ subwoofer. If the bass seems too loud
or boomy, you can adjust this toward the Min setting. If you want more bass, you can adjust toward
the Max setting.
16