Advertisement
B) OPERATION INSTRUCTIONS
To raise table height:
1. Release brake clamps 'F', by pulling red brake clamp handles away from the unit (Model #4320 only).
2. Crank the handle 'G' clockwise to raise the tabletop to desired height and retract the handle under tabletop to lock the
height in position.
3. Lock brake clamps 'F', by pushing on red locking handle towards the inside of the unit to engage the locking pad in the
position. (Model # 4320 only)
To lower table height:
1. Release brake clamps 'F', by pulling red brake clamp handles away from the unit (Model #4320 only).
2. Crank the handle 'G' counter clockwise to lower the tabletop to desired height and retract the handle under tabletop
to lock the height in position.
3. Lock brake clamps 'F', by pushing on red locking handle towards the inside of the unit to engage the locking pad in the
position. (Model # 4320 only)
CAUTION: Do not crank the handle when brake is engaged, or damage can occur.
Rev. 110514 aj
Page 2 of 2
©2014 HAUSMANN INDUSTRIES, INC.
Advertisement
