DELTA PLUS VECUT32GR Manual

Technical specs
VECUT32GR
- VENICUT32GR
Name:
DELTANOCUT® KNITTED GLOVE - PU-COATING PALM
Size:
06 - 07 - 08 - 09 - 10 - 11
Colour:
Grey
Description :
High Performance Polyethylene grey liner (HPPE) with spandex knitted glove / grey polyurethane (PU) coating on palm &
fingertips. 8-cm elasticated wrist. Gauge 15.
Materials:
Gloves : High Performance Polyethylene grey liner (HPPE) with spandex
Coating : 100% polyurethane
Strong points:
DELTANOCUT®:
The new fibre is a resistant single fibre polymer, to a lesser thickness compared with conventional fibres (mixture of several
fibres) and thereby provides maximum dexterity. The composition provides a cut resistancy of level 3.
The fibres soft touch texture provides comfort and feeling of freshness all day.
DELTAnocut ® fibre is guaranteed DMF free for a total material safety and therefore a protection of the handled objects.
DELTAnocut ® fibre is also washable for hygiene purposes and the gloves can be reused.
Instructions for use:
All-purpose protective gloves for mechanical risks, for general use in dry environment, with no chemical, microbiological,
electrical or thermal hazards. It has a grip pattern and prevents hand contact and prints. Its anatomical shape is adapted to
the hand. Its thinness ensures a perfect dexterity, a very good sensitivity and grip.
Limits to use:
Do not use other than for the purpose defined in the instructions for use below. *Users attention is drawn to the fact that
gloves with very high resistance to traction (level 4) must not be used when there is a risk of catching in moving
machines.These gloves do not contain any substances known to be carcinogenic or toxic. Contact with the skin may cause
allergic reactions in sensitive persons (natural latex, in the cuff wrists of some gloves). In the event of a reaction, cease use
and consult a doctor. Ensure your gloves are intact before and during using its and replace if necessary.
Instructions for storage:
Store in a cool, dry place away from frost and light in their original packaging.
Instructions for cleaning / maintenance:
Machine wash at 30°C maximum (numbers maximum washing : 4). Fast cycle. Do not use detergent. Drying in open air or
cold.
Performances :
The levels are obtained on the palm of the glove. They are in increasing levels of performance (from 0 to 4 or 5). 0 indicates
that the glove has a lower performance level than the minimum for the individual hazard given. X: indicates that the glove has
not been subjected to testing or the test method is not suitable due to the design of the gloves or the material.
- Abrasion (from 0 to 4): Ability of the glove to withstand wear
DELTA PLUS GROUP
La Peyrolière - B.P. 140 - 84405 APT Cedex - France
www.deltaplus.fr
UPDATE : 23/08/2012