Safety - Piranha CNC Plasma Cutting Table Operating Manual

SAFETY

SAFETY
INTRODUCTION
Read this chapter on safety and the sections of vendor components manuals on
safety before beginning to operate the Piranha Plasma Cutting Table.
Do not become complacent about safety or completely dependent on safety devices.
SUPERVISORS
It is very important that a safe and appropriate working environment is provided for
this Piranha equipment and in compliance with applicable federal and local industry
standards.
It is imperative that programmers, machine operators and maintenance personnel be
trained adequately in the use and care of the equipment. These employees should
receive the proper instruction in order to have a complete understanding of the
operation of this machine before beginning to program, operate or service it.
Careful programming and debugging of new programs is essential for successful
operation of this machine. Use program Stop Codes to stop machine motion for
operator removal of parts or scrap.
Never allow operators to place any part of their body into the machine while the
machine is active. Insure that all personnel understand the function and use of
EMERGENCY STOP and CYCLE STOP button.
Sept-2018
5