Samsung WF218ANB User Manual page 21

For any codes not listed above, call 1–800–726–7864 (1–800–SAMSUNG)
WF218ANB-02440B-04_EN.indd 21
Motor speed sensor problem.
Temperature sensor problem.
High current detected.
High/Low voltage detected.
Too many suds are detected
during the washing session.
The unit is put on hold until the
suds are reduced. Then, the unit
will go back to the operation.
When it finishes washing, End and
Sd codes will blink in turn.
Restart the cycle.
If the code reappears, call for service.
Restart the cycle.
If the code reappears, call for service.
Restart the cycle.
If the code reappears, call for service.
Restart the cycle.
If the code reappears, call for service.
To prevent it, cut down on detergents.
troubleshooting _21
2009-03-06 ¿ÀÈÄ 4:14:01