Jet 719102 Assembly Instructions And Parts List

Stand for JWL-1015/1015VS Lathes
Read and understand the
entire owner's manual that accompanied your
JWL-1015 lathe before attempting assembly or
operation of accessories.
Inspect contents for shipping damage. Report any
damage or part shortages to your distributor. Do
not discard shipping materials until accessory is set
up and functioning properly.
Shipping contents
1 Cross bar
2 Stands
2 Tubes
2 Brackets
8 Socket head cap screws, 5/16x1"
4 Socket head button screws, 5/16x1"
4 Socket head button screws, 5/16x1/2"
12 Lock washers, 5/16"
16 Flat washers, 5/16"
Tools required for assembly
1/4" hex key ("Allen wrench")
9/16" (or adjustable) wrench
Assembly
(Bracketed numbers refer to index numbers in
exploded view.)
1. Assemble the stands [2] to the tubes [3], with
socket head cap screws [8], lock washers [7]
and flat washers [6]. Firmly tighten screws.
2. Install a leveler [4] with nut [11] into each end
of the stands. A leveler can be adjusted for
height and leveling of the lathe, and the nut
tightened up against the stand [2] to secure
the setting.
3. Mount a bracket [1] to each leg set with two
5/16x1" button head screws [5] and washers
[6/7]. Multiple holes allow adjustment of lathe
height. Tighten screws.
JET
427 New Sanford Road
LaVergne, Tennessee 37086
Ph.: 800-274-6848
www.jettools.com
Assembly Instructions and Parts List
Stock No. 719102
4. Note: The bracket [1] ledges must face toward
each other. Install cross bar [9] with four button
screws and washers [10/6]. Do not fully
tighten yet.
5. Place the lathe onto the stand brackets, and
secure with 5/16x1 socket head cap screws [8]
and washers [6/7]. Insert all four screws first,
then tighten each securely.
6. Fully tighten the screws in the cross bar [9].

Specifications

Stock number: 719102
Assembled dimensions: 693mm L x 575mm W x
840mm H (27.3" x 22.64" x 33.07")
Net weight: 26 kg (57 lb)
Shipping dimensions: 803mm L x 361mm W x
197mm H (31.61"L x 14.2"W x 7.76")
Shipping weight: 27 kg (59 lb)
Manual No. M-719102
Revision A1 02/2014
Copyright © 2014 JET