Table of Contents
Advertisement
CC1260 iCap™ Interface Card
3.2.1 System
The System tab contains network configuration and remote connection
setup fields.
MAC Address
Configuration
IP Address
Subnet Mask
Gateway
8
Displays the encoder's MAC address.
Selects between static and DHCP network
settings.
Selects the IP address the unit will be as-
signed on your LAN (read-only in DHCP
mode).
Selects the bit mask used; this should
match the mask used on your LAN (read-
only in DHCP mode).
Selects the address of the device that the
unit will use to communicate outside of
your LAN (read-only in DHCP mode).
Advertisement
Table of Contents
