Cleaning And Maintenance - Philips QC5570 Manual

14
English

Cleaning and maintenance

5 To contour the neckline and the sideburns, turn
the appliance and make downward strokes.
Note: Move the appliance slowly and smoothly.
Just follow the natural hairline.
6 Adjust the position of the swivel head to make
contouring easier (see 'Using the swivel head ').
Regular cleaning guarantees better grooming
results.
Never clean, remove or replace a shaving or
cutting unit while the appliance is switched on.
Always check if the water is too hot, to prevent
burning your hands.
Never dry cutting units or shaving foils with a
towel or tissue, as this may cause damage.
Never use compressed air, scouring pads,
abrasive cleaning agents or aggressive liquids
such as petrol or acetone to clean the
appliance.
Clean the appliance every time you have used it by
rinsing it under the tap or with the cleaning brush
supplied.
Always unplug the appliance before you clean it
under the tap.
Be careful that the cutting element does not fall
on the floor.
1 Switch off the appliance and disconnect it from
the mains.
2 Remove the comb attachment.
3 Rinse the comb attachment under the tap or
clean it with the cleaning brush supplied.