Summary of Contents for HORNER Shearing Rambo Vehicle
Page 1
Sheep Shearer and cattle clipper INSTRUCTIONS www.HornerShearing.com...
Page 2
Essential Operator Skills The operator must be the trained in the safe use of the machine. • The operator must be experienced in handling the animals to be shorn. • Operation Only connect to a 12 volt DC power supply. •...
Page 3
Illustration 1 Illustration 2 Fitting the comb and cutter Ensure the sharp surfaces come together. • • Loosen the tension nut, slacken off the comb screws and remove the old comb and cutter. Make sure the new comb and cutter are clean. Dirt on the ground surfaces will •...
Page 4
Care of Combs and Cutters Wash used combs and cutters each day • Left dirty, the salt in sheep grease, and dirt, eats into the metal. • Once pitted or rusted, it is impossible to get sharp edges again when sharpening. •...
Need help?
Do you have a question about the Rambo Vehicle and is the answer not in the manual?
Questions and answers