Changing The Preset Station Table; Selecting The Rf Out Sound Mode (B/G-D/K) (Newzealand Model Only); Setting The Dvd-Vcr Output Channel - Samsung DVD-V70 Instruction Manual

VCR

Changing the Preset Station Table

You can rearrange the Station Table and give different programme
Language : English numbers to the stations listed according to your own preferences.
Install
User Set
GB
1
Auto Power Off : Off
Screen Messages : On
2
Australia Model 3
Install
4
Auto Setup
Manual Setup
VCR Output CH : CH 38
5
6
Newzealand Model
7
Install
Auto Setup
Manual Setup
8
TV System : G
VCR Output CH : CH 36
9
TV STATION TABLE
PR CH NAME
1 21 - - - -
2
3
4
5
SWAPPING : OK
DELETE : CLEAR RETURN
TV STATION TABLE
PR CH NAME
1
2
3 21
- - - -
4
5
SWAPPING : OK
DELETE : CLEAR RETURN
24
After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
Press the corresponding , buttons to select the Install
❷
option.
Press the OK or ❿ buttons to select this option.
Result: The Install menu is displayed.
Press the corresponding or buttons, until the Manual
❷
Setup option is selected.
Press the OK or ❿ button to select this option.
Result: The TV STATION TABLE menu is displayed.
Press the corresponding or buttons, until the required preset
❷
TV programme is selected.
Result: The selected station is displayed at the same time on
the television screen.
To change the programme number assigned to a station press the
OK button on the remote control. (For example, To move a TV
station in programme 1 to programme 3)
Press the or buttons to select required position.
❷
And then press OK again to swap the position.
On completion, press the RETURN button four times to exit the
menu.
Selecting the RF OUT Sound Mode (B/G-D/K)
(Newzealand Model only)
You can choose the sound mode (B/G or D/K) according to the TV
set connected to your VCR.
1 After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
2 Press the corresponding , buttons to select the
❷
option.
3 Press the OK button to select this option.
Result: The Install menu is displayed.
4
Press the or buttons, until the TV System option is
❷
selected.
5 Press the ➛ or ❿ button to select G or K.
6 On completion, press RETURN to exit the menu.

Setting the DVD-VCR Output Channel

Your DVD-VCR output channel may need to be changed if the
pictures suffer from interference or if your TV cannot find the
pictures.
Also, you can change the DVD-VCR output channel to adjust the
frequency in which information is displayed on the screen.
1 After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
2
Press the corresponding , buttons to select the
❷
option.
3 Press the OK or ❿ to select this option.
Result: The Install menu is displayed.
4
Press the or buttons, until the VCR Output CH
❷
selected.
5 Select the required output channel (CH21~CH69) by pressing the
OK or ❿ buttons (Australia:CH28 ~ CH69).
CH28 . . CH38 . . CH69
(Australia Model)
CH21 . . CH36 . . CH69
(Newzealand Model)
6 On completion, press RETURN to exit the menu.
Then tune your television again (see page 16).
VCR
Language : English
Install
User Set
Auto Power Off : Off
Screen Messages : On
Install
Install
Auto Setup
Manual Setup
G
TV System : G
VCR Output CH : CH 36
K
VCR
Language : English
Install
User Set
Auto Power Off : Off
Screen Messages : On
Australia Model
Install
Install
Auto Setup
CH:28
Manual Setup
:
VCR Output CH : CH 38
CH:38
:
option is
CH:69
Newzealand Model
Install
Auto Setup
Manual Setup
CH:21
TV System : G
:
VCR Output CH : CH 36
CH:36
:
CH:69
25
GB