Do Probes - Hanna HI8410 Instruction Manual

All Hanna DO probes are shipped dry. To hydrate the probe and prepare
it for use proceed as follows:
1. Remove the black & red plastic cap. This cap is used for shipping
2. Insert the supplied O-ring in the membrane
3. Rinse the supplied membrane (HI 76409A/P) with electrolyte
4. With the sensor facing down screw the cap clockwise to the end
sale@ponpe.com
D.O. PROBES D.O. PROBES
D.O. PROBES D.O. PROBES D.O. PROBES
purposes only and can be thrown away.
(see figure).
while shaking it gently. Refill with clean electrolyte. Gently tap
the membrane over a surface to ensure that no air bubbles
remain trapped. To avoid damaging the membrane, do not
touch it with your fingers.
of the threads. Some electrolyte will overflow.
8
www.ponpe.com