Advertisement
Charging
This headset has its own battery inside. The internal battery
Must be fully charged before first time use.
Charging Time
Talk Time
2 hours
3 hours
-. Charging in progress : Red light on
-. Charging completed : Blue light on
Power On / Off
Function
Press and hold down Power/Call Button
until Blue light flashes 4 times.
On
(Approx. 3 seconds)
Press and hold down Power/Call Button
Off
Until Red light flashes 3 times.
(Approx. 3 seconds)
Standby Time
72 hours
instruction
Pairing / Reconnection
Pairing
Pair the headset with the mobile phone before using the device.
Pairing is a process which establishes a new relationship
between two Bluetooth enabled devices through the
exchange of a link key.
Ⓐ Make sure that the headset is turned off.
Ⓑ Set the headset to a pairable state.
Press and hold down for 5 seconds until blue light is
turned on.
Ⓒ Search for the headset on your mobile phone according
to the guide of the phone. In most cases, selecting ¡set¡
and ¡connection¡ from the menu to search for the bluetooth
device. You may also select the option to add the device
directly.
Ⓓ When the mobile phone finds
Ⓔ In case the mobile phone asks for passkey or PIN, enter
0000
to connect the two devices.
Reconnection
Reconnection is needed when you are out of range and then
Come back into range or when the headset is powered on again.
Tap the Power/Call Button once.
DT100
, pair it with the phone.
Advertisement
