Advertisement
Operation
Turning on the tree
NOTE: If some bulbs do not light or flicker, search for any
loose plugs and/or broken, loose, or missing bulbs. Replace
bulbs promptly with the replacement bulbs provided in
order to maintain the performance and life expectancy of
your tree.
Step 1. Connect the light strings of the tree together and
plug the power cord into a wall outlet.
Step 2. If the tree comes with a foot pedal, step on the
On/Off button.
Maintenance
Spare parts
This tree package includes hinge pins, washers, bulbs
and fuse for any replacement or repair that you need to
perform on your tree. If extra parts are needed, contact
the Customer Service Team at 1-877-527-0313 between
the hours of 8 am and 5 pm EST, Monday through Friday.
Repairing Loose Hinges
Step 1. Place the branch into the slot of the bracket
Step 2. Insert a new hinge pin through the holes of the
bracket and secure with a washer.
Use and Care Instructions
1. Before using or reusing, inspect product carefully. Discard
any products that have cut, damaged or frayed wire
insulation or cords, cracks in the lampholders or enclo-
sures, loose connections, or exposed copper wire.
2.Before disassembling the tree, unplug the tree and remove
all ornaments and decorations.
3.Gently lift the tree top straight up to remove from the
center section and fold all branches towards the pole.
4.Repeat this step for the center and bottom tree sections.
5.When storing the product, carefully remove the product
from wherever it is placed, including tree,
branches, or bushes, to avoid any
undue strain or stress on the
product conductors, connections,
and wires. Cover the protective cap
on the poles to avoid damaging the
internal parts.
6.When not in use, store neatly in a cool, dry location
protected from sunlight.
User servicing instructions
HOW TO USE THE DUAL COLOR LIGHT CONTROLLER
AND REMOTE CONTROL:
Press the selector button on the "Dual Color Light Control
ler" or "Remote Controller" to select among: (1) CLEAR AND
MULTI-COLOR ALTERNATING; (2) CLEAR LIGHTS; (3)
MULTI LIGHTS and (4) TURN OFF BOTH LIGHTS.
Note: The lights will be automatically reset to "CLEAR AND
MULTI-COLOR ALTERNATING" every
time the product is powered up. For
the remote controller, replace only
with CR2032 battery. See bottom of
the remote controller for
replacement instruction.
Selector
Button
Remote
Controller
Light
Controller
Model: DOU186755LEDCMR
CAUTION:
Use only power adaptor that was
provided with this product. Using a different power
adaptor will damage the lights and cause fire, electrical
shock hazard.
Fuse replacement of extension cord
a)Grasp plug and remove from the receptacle or other
outlet device. Do not unplug by pulling on cord.
b)Open fuse cover. Slide open fuse access cover on top
of attachment plug towards blades.
c)Remove fuse carefully.
d)Risk of fire. Replace fuse only with
5,7, or10 Amp, 125 Volt fuse for the
power cord set.
e)Close fuse cover. Slide closed the fuse
access cover on top of attachment plug.
f )Risk of fire.Do not replace attachment plug. Contains
a safety device (fuse) that should not be removed.
Discard product if the attachment plug is damaged.
Troubleshooting
Problem
Solution
The tree does
Ensure that all tree sections are
not light
plugged into each other and that the
tree is plugged into the wall. If your
tree came with a foot pedal, step on
the On/Off button.
Check for blown fuses at the light string
and power cord plugs. Replace as
needed with the replacement fuses
provided.
Check for loose, broken, or missing
bulbs and replace as needed with the
replacement bulbs provided
Christmas Tree
Sku # 1000 654 240
SPARE FUSE
Advertisement
