RCA RCR002RWDZ Owner's Manual

RCA RCR002RWDZ Owner's Manual

Universal remote control
Hide thumbs Also See for RCR002RWDZ:

Advertisement

Available languages

Available languages

RCR002RWDZ US 00
2594
4.
When you've finished entering

Step 2: Program your remote

the five-digit code, keep holding
down the device key and look at
the POWER key.
To use this universal remote with your home entertainment
system, first you need to program it to control your devices.
Is the POWER key
There are four ways you can program the universal remote to
illuminated?
RCR002RWDZ
operate your devices. Try them in the order listed.
YES: You're done! You've programmed this device key.
The Direct Code Entry lets you enter a code from the
NO, it blinked four times and turned off: You have
accompanying code list for your brand of device.
Universal Remote Control
either entered a code number that is not in the code lists
or missed a step in the code entry procedure. Try step 3
Owner's Manual
The Brand Code Search searches through the codes for
again.
select brands of devices.
Manual del Propietario (parte posterior)
The Auto Code Search goes automatically through all the
NOTES
codes for the device you're trying to control.
Test the remote with the device to make sure the device
FCC Statement:
The Manual Code Search lets you manually go through
key is programmed with the correct code for maximum
This device complies with part 15 of the FCC Rules. Operation is subject to the
functionality. If some features don't work, try a different code
all the codes for the device you're trying to control.
following two conditions: (1) This device may not cause harmful interference,
in the list.
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Remember to enter the code for future reference in the box
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
provided in the Code Retrieval section of this manual.
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate

Direct Code Entry

If your brand isn't listed in the code list, use one of the Code
radio frequency energy and, if not installed and used in accordance with
Search methods to program the remote control. (Refer to the
the instructions, may cause harmful interference to radio communications.
Direct Code Entry lets you enter a code from the accompanying
However, there is no guarantee that interference will not occur in a particular
Auto and Manual Code Search methods.)
code list for your brand of device.
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
If you release the device key any time during the Direct Code
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
Entry procedure, the POWER key blinks four times, and the
TIP: Each device key is associated with a type of device—
Reorient or relocate the receiving antenna.
process is exited. The last programmed code under the
the TV is preset to search for TVs, and SATELLITE•
Increase the separation between the equipment and receiver.
device key is retained.
CABLE•STREAMING for satellite receivers, cable boxes or
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
streaming players.
Consult the dealer or an experienced radio/TV technician for help.
Caution: Any Changes or modifications not expressly approved by the party

Brand Code Search

responsible for compliance could void the user's authority to operate this
equipment.
The Brand Code Search goes through only the codes for one of
Industry Canada Regulatory Information
1.
the select brands listed in the accompanying code list. If your
CAN ICES-3 (B)/NMB-3 (B)
Manually turn on the device you
brand of device is listed, this search can be very quick and easy.
Avis d'Industrie Canada
want to control.
CAN ICES-3 (B)/NMB-3 (B)
TIPS: Each device key is associated with a type of
SAVE THIS MANUAL AND THE CODE LISTS!
device—the TV is preset to search for TVs, and SATELLITE•
Remote controls can sometimes lose their programming when
you change the batteries. Make sure you keep the manual and
CABLE•STREAMING for satellite receivers, cable boxes or
code lists in a safe place so that you can reprogram the remote if
streaming players.
2.
you need to.
Find the Code List that came with
the remote. Locate the section for
To exit without saving a new code at any point in the Brand
Tip: This remote is already programmed to operate most RCA-
branded TVs and satellite receivers. Just press the corresponding
the type of device you're trying to
Code Search, press the EXIT key.
key—TV for a television, STREAMING•CABLE•SATELLITE for a
program, and find your brand in
satellite receiver.
that section. Circle the codes for
your brand and keep them handy.

Step 1: Install your batteries

1.
Manually turn on the device you
want to control.
Your universal remote requires two AAA alkaline batteries (not
included).
3.
Press and hold the device key you want to program (the
POWER key illuminates).
To install the batteries:
While you're holding down the device key, use your other
1.
Remove the battery compartment cover.
2.
hand enter the first five-digit code for your brand in the
Find your device's brand in the
2.
Insert the batteries, matching the batteries to the (+) and (–)
code list (the POWER key turns off after the first digit).
Brand Code list section of the
marks inside the battery compartment.
accompanying code list. Circle
the number for your brand and
3.
Push the battery cover back into place.
keep the list handy.
POWER
POWER
Battery Precautions:
TELEVISION
STREAMING
TELEVISION
STREAMING
CABLE
CABLE
SATELLITE
SATELLITE
• Do not mix old and new batteries.
3.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable
Press and hold the device key you want to program. The
(nickel-cadmium) batteries.
POWER key illuminates.
• Always remove old, weak or worn-out batteries promptly and
ENTER
INPUT
ENTER
INPUT
_
While you're holding down the device key, use your other
recycle or dispose of them in accordance with Local and National
_
GUIDE • HOME
GUIDE • HOME
hand to press and hold the remote's POWER key at the
Regulations.
same time. The POWER key turns off.
Battery Saver
OK
POWER
OK
Your universal remote control saves battery power by automatically
turning off if any key is pressed for more than 60 seconds. This
TELEVISION
STREAMING
REVERSE
FORWARD
CABLE
saves your battery life should your remote get stuck in a place
PLAY
SATELLITE
REVERSE
FORWARD
where the keys remain depressed, such as between sofa cushions.
PLAY
RECORD
PAUSE
STOP
RECORD
PAUSE
STOP
SKIP BACK
SKIP FWD
SLOW
SKIP BACK
SLOW
SKIP FWD
ENTER
INPUT
_
4.

Auto Code Search

Wait until the POWER key comes on
and stays on. Then release both keys.
POWER
The Auto Code Search goes automatically through all the
codes for the device you're trying to control. When you find
POWER
the one that operates your device, you can stop the search and
POWER
TELEVISION
STREAMING
store that code.
CABLE
SATELLITE
TELEVISION
STREAMING
CABLE
5.
SATELLITE
Look at the numbers you circled for
TELEVISION
STREAMING
CABLE
SATELLITE
TIPS: Each device key is associated with a type of
your device's brand code number.
device—the TV is preset to search for TVs, and SATELLITE•
Press those numbers on the remote
CABLE•STREAMING for satellite receivers, cable boxes or
keypad.
streaming players.
ENTER
_
INPUT
To exit without saving a new code at any point in the Auto
ENTER
INPUT
ENTER
INPUT
_
_
GUIDE • HOME
Code Search, press the EXIT key.
6.
GUIDE • HOME
GUIDE • HOME
Point the remote directly at the
front panel of the device you want
to control. Press POWER on the
remote and wait 2 seconds. The
1.
Manually turn on the device you
remote is testing a single code for
OK
want to control.
your device's brand.
OK
OK
Did your device turn off?
YES: Press the STOP key to store the code. You're done!
REVERSE
FORWARD
PLAY
2.
You've programmed this device key.
Press and hold the device key you want to program. The
REVERSE
FORWARD
RECORD
PAUSE
POWER key illuminates.
NO: Press POWER again. The remote tests the next code
PLAY
STOP
REVERSE
FORWARD
PLAY
for your brand.
SKIP BACK
SKIP FWD
RECORD
SLOW
PAUSE
While you're holding down the device key, use your other
STOP
RECORD
PAUSE
Keep pressing POWER every 2 seconds until your device
hand to press and hold the remote's POWER key at the
STOP
SKIP BACK
SKIP FWD
turns off. When it does, press STOP.
same time. The POWER key turns off.
SLOW
SKIP BACK
SKIP FWD
SLOW
POWER
POWER
NOTES
Throughout the programming of each key, be sure to keep
TELEVISION
STREAMING
TELEVISION
STREAMING
CABLE
CABLE
the remote pointed at the IR sensor of the device you are
SATELLITE
SATELLITE
currently programming the remote to control.
Test the remote with the device to make sure the device
key is programmed with the correct code for maximum
3.
Wait until the POWER key comes
functionality. If some features don't work, try a different
on and stays on. Then release
ENTER
_
INPUT
POWER
code. See the "Testing the Code for Maximum Functionality"
ENTER
INPUT
_
both keys.
section below for more information.
GUIDE • HOME
GUIDE • HOME
During the Brand Code Search, the remote ignores
TELEVISION
STREAMING
keypresses that aren't part of the search.
CABLE
SATELLITE
4.
The search times out after two minutes (the POWER key
Point the remote directly at the
blinks four times and turns off, and the last programmed
front panel of the device you
OK
code under that device key is retained).
want to control. Press PLAY on
OK
the remote and wait 5 seconds.
The POWER key blinks four times and turns off when the
The remote is testing a batch of
remote has gone through all the codes. The remote exits the
10 codes on your device.
ENTER
INPUT
Brand Code Search. If your device hasn't turned off yet, try a
_
REVERSE
FORWARD
different search method.
PLAY
GUIDE • HOME
Did your device turn off?
REVERSE
FORWARD
RECORD
PAUSE
PLAY
STOP
YES: Go to step 5.
RECORD
PAUSE
SKIP BACK
SKIP FWD
STOP
NO: Press PLAY again. The remote tests the next batch of
SLOW

Testing the Code for Maximum Functionality

10 codes.
SKIP BACK
SKIP FWD
SLOW
1. Try a variety of the device's functions with the remote. If
some device features don't work, go to the next step to
Keep pressing PLAY every 5 seconds until your device turns
OK
try a different code.
off.
2. Repeat the Brand Code Search from the beginning. When
5.
When your device turns off, press
the device turns off for the first time, don't press the STOP
the REVERSE key on the remote
key, which would store the same code. Instead, with the
and wait at least 2 seconds.
unit now off, continue to press the POWER key repeatedly
REVERSE
FORWARD
The remote tries the last of the
PLAY
until the unit turns back on.
previous ten codes.
RECORD
PAUSE
3. Once the unit turns back on, you have found another code
STOP
Did your device turn on?
that operates the device. Press the STOP key.
SKIP BACK
SKIP FWD
YES: Press the STOP key. You're
SLOW
4. Test the key's functionality again by attempting to control
done! You've programmed this
a variety of the device's functions. If the code that has
device key.
been stored controls the majority of the device's functions,
NO: Press REVERSE again. The remote tests the next
programming is complete. If the code stored does not give
code in the batch.
POWER
maximum functionality, try another code.
Keep pressing REVERSE every 2 seconds until your device
turns back on. When it does, press STOP.
TELEVISION
STREAMING
CABLE
SATELLITE
Note: If you accidentally press the REVERSE key after your
device turns on, press the FORWARD key. Then, wait two
seconds to see if your device turns off again.
ENTER
INPUT
2.
Press and hold the device key you want to program. The
NOTES

Tour of the Remote

POWER key illuminates
Throughout the programming of each key, be sure to keep
the remote pointed at the IR sensor of the device you are
While you're holding down the device key, use your other
currently programming the remote to control.
hand to press and hold the remote's POWER key at the
In most cases, the keys on
same time. The POWER key turns off.
this remote perform the same
Test the remote with the device to make sure the device
functions as the keys on your
key is programmed with the correct code for maximum
original remotes once you've
POWER
POWER
functionality. If some features don't work, try a different
programmed this remote to
code. See the "Testing the Code for Maximum Functionality"
operate your components.
section below for more information.
TELEVISION
STREAMING
CABLE
TELEVISION
STREAMING
Many keys on this remote have
SATELLITE
CABLE
SATELLITE
other functions as well.
During the Auto Code Search, the remote ignores
keypresses that aren't part of the search.
Illuminated POWER key serves
as an indicator light to provide
The search times out after two minutes (the POWER key
feedback.
3.
blinks four times and turns off, and the last programmed
Wait until the remote's POWER key
ENTER
INPUT
_
code under that device key is retained).
comes on and stays on. Then release
ENTER
POWER
INPUT
_
Device keys (TV, SATELLITE•
GUIDE • HOME
both keys.
CABLE•STREAMING) put the
GUIDE • HOME
The POWER key blinks four times and turns off when the
remote in the right mode to
remote has gone through all the codes. The remote exits the
TELEVISION
STREAMING
control your device.
Auto Code Search. If your device hasn't turned off yet, try a
CABLE
SATELLITE
4.
different search method.
Point the remote directly at the front panel of the device you
GUIDE•HOME and MENU put
want to control. Press POWER on the remote and wait 2
OK
the remote in menu/guide
seconds. The remote is testing a single code for your device.
OK
mode; they also access the
Testing the Code for Maximum Functionality
same features as the keys on
Did your device turn off?
your original remotes.
1. Try a variety of the device's functions with the remote. If
YES: Press the STOP key to store
ENTER
INPUT
_
some device features don't work, go to the next step to
REVERSE
FORWARD
PLAY
the code. You're done! You've
EXIT exits remote
try a different code.
REVERSE
GUIDE • HOME
FORWARD
programmed this device key.
PLAY
programming; it also performs
RECORD
PAUSE
STOP
2. Repeat the Auto Code Search Method from the beginning.
the same functions as on your
RECORD
PAUSE
SKIP BACK
SKIP FWD
NO: Press POWER again. The
STOP
When your device turns off, do not stop searching.
SLOW
original remotes.
remote tests the next code for
Instead, with the unit now off, continue to press the PLAY
SKIP BACK
SKIP FWD
SLOW
Arrow keys act as navigation
key every 5 seconds until the unit turns back on.
your device.
keys in device guides and
3. Once the unit turns back on, press the REVERSE key on the
Keep pressing POWER every 2
menu systems.
OK
remote every 2 seconds until your device turns off again.
seconds until your device turns off.
When your device turns off again, press the STOP key.
When it does, press STOP.
The INPUT and — (dash) key
has two functions: (1) it toggles
4. Test the key's functionality again by attempting to control
TIP: Because there are so many codes, you may have to press
through all the video sources
a variety of the device's functions. If the code that has
the POWER key many times—possibly hundreds of times.
connected to your TV; (2) when
been stored controls the majority of the device's functions,
programming is complete. If the code stored does not give
REVERSE
FORWARD
you're entering digital channel
PLAY
maximum functionality, try another code.
numbers directly, this button
RECORD
PAUSE
NOTES
lets you separate the main
STOP
channel number from the sub-
Throughout the programming of each key, keep the remote
SKIP BACK
SKIP FWD
SLOW
channel number (such as 59.1).
pointed at the IR sensor of the device you are programming
the remote to control.

Manual Code Search

Test the remote with the device to make sure the device
The Manual Code Search lets you go one-by-one through all the
key is programmed with the correct code for maximum
codes for the device you're trying to control. When you find the
functionality. If some features don't work, try a different
one that operates your device, you can stop the search and store
code. See the "Testing the Code for Maximum Functionality"
that code.
section below for more information.
During the Manual Code Search, the remote ignores
TIPS: The Manual Code Search method may take a long time
keypresses that aren't part of the search.
because the remote searches through all of the codes in
its memory one-by-one. If your brand is listed in the Brand
The search times out after two minutes (the POWER key
Codes or the Code Lists, first try the Brand Code Search or
blinks four times and turns off, and the last programmed
code under that device key is retained).
the Direct Code Entry method.
The POWER key blinks four times and turns off when the
Each device key is associated with a type of device—the TV is
remote has gone through all the codes. The remote exits the
preset to search for TVs, and STREAMING•CABLE•SATELLITE
Brand Code Search. If your device hasn't turned off yet, try a
for satellite receivers, cable boxes or streaming players.
different search method.
To exit without saving a new code at any point in the Manual
Testing the Code for Maximum Functionality
Code Search, press the EXIT key.
IMPORTANT
1. Try a variety of the device's functions with the remote. If
some features of your devices don't work, go to the next
Because this remote controls more than one device, you
step to try a different code.
must first "tell" the remote which device you wish to
2. Repeat the Manual Code Search and Entry Method from
operate. That means, if you wish to operate your TV, you
1.
the beginning. When the device turns off for the first time,
must first press the TV key to put the remote in the TV
Manually turn on the device you
don't press the STOP key, which would store the same
Mode. The remote stays in that device mode until you
want to control.
code. Instead, with the unit now off, continue to press the
press a different device key. For example, if your remote is
POWER key repeatedly until the unit turns back on.
in TV Mode and you want to operate a streaming player,
3. Once the unit turns back on, you have found another code
you must press the STREAMING•CABLE•SATELLITE key to
that operates the device. Press the STOP key.
change device modes.
4. Test the key's functionality again by trying a variety of
functions. If the code controls the majority of the device's
functions, programming is complete. If the code stored
does not give maximum functionality, try another code.

Code Retrieval

Advanced Functions

Once you've programmed the remote to control your devices,
you may want to record the codes for future reference. If you
used the Direct Code Entry method, this is easy. Just find

Volume Punch-Through

the codes you entered and make a note of them in the boxes
POWER
below. If you used one of the Code Search methods to program
Volume punch-through allows the VOL and MUTE keys, when
your remote or if you used the Direct Entry method but don't
pressed in
STREAMING•CABLE•SATELLITE
mode, to "punch
remember the code, you will need to retrieve each device's
through" to TV. Volume punch-through occurs automatically
TELEVISION
STREAMING
and allows you to control the volume without exiting the
five-digit code. Retrieving the actual code and writing it down
CABLE
SATELLITE
current mode.
will save you time if you ever need to program the remote
again. If the codes are recorded, you can use the Direct Entry
Note: Volume punch-through does not occur in cases where
method to reprogram your remote to control your devices,
the component code has its own volume/mute controls, such
which is quick and easy.
as some satellite receivers.
1.
Press and hold the device key (TV,
SATELLITE• CABLE•STREAMING) whose
POWER
ENTER
INPUT
_
code you wish to retrieve. The POWER
Channel Lock
key illuminates. Keep pressing the
GUIDE • HOME
Channel lock automatically sends channel commands, like the
device key.
CH, GO BACK, and 0–9 number keys, to your satellite receiver,
TELEVISION
STREAMING
CABLE
cable box, or digital TV converter when you're in TV mode.
SATELLITE
This can save you keypresses if you use a device other than
your TV to change channels.
2.
While holding the device key down, press and hold the
INFO key. The POWER key turns off. After holding down
To turn channel lock on:
both keys for three seconds, the POWER key turns back on.
1.
Press and hold the device key for the device you use to
OK
change channels. While you're holding down this device
3.
Release both keys. The POWER key remains on.
key, use your other hand to press and hold the remote's
ENTER
_
INPUT
4.
Starting with the number 1 key, press and release each
CH up key at the same time.
GUIDE • HOME
number key on the keypad in the following order: 1-9, then
2.
Wait until the remote's POWER key comes on and stays on.
0. The number that causes the POWER key to blink is the
Then release both keys.
first number of the code. As you find each number of the
REVERSE
FORWARD
code, write it down for future reference.
PLAY
3.
Press ENTER to lock channel commands to this device.
Note: All TV codes begin with the number 1; and all
RECORD
PAUSE
To turn channel lock off:
STOP
satellite receivers, cable boxes, streaming players and DTV
Actual model may vary from
1.
Press and hold the TV key. While you're holding down the
converters, the number 5.
OK
SKIP BACK
SKIP FWD
SLOW
illustration
TV key, use your other hand to press and hold the remote's
5.
Repeat step 4 until you have retrieved all five numbers in
CH down key at the same time.
the code. After the fifth number is retrieved, the POWER
2.
Wait until the remote's POWER key comes on and stays on.
key blinks briefly, then turns off.
Then release both keys.
TIP: To exit the Code Retrieval Mode at any time, press the
REVERSE
FORWARD
3.
Press ENTER to start changing channels with your TV.
EXIT key.
PLAY
RECORD
Note: If you press an invalid key during the Code Retrieval
PAUSE
STOP
process, the remote will not respond. If you do not press a
SKIP BACK
SKIP FWD
valid Code Retrieval key (TV, STREAMING•CABLE•SATELLITE,
SLOW
INFO, EXIT), Code Retrieval times out after 15 seconds. The
POWER key blinks four times, and then turns off.
SATELLITE•CABLE•
TV CODE
STREAMING CODE
1
5
SAT
CABLE
STREAMING PLAYER
Problem: The device's menu does not appear on the TV screen.

Troubleshooting

Make sure you have connected the device to your TV properly and
selected the correct input. (See your devices' Owner's Manuals for
proper connection procedures.)
Problem: The remote does not operate your device.
Make sure the remote is in the correct mode by pressing the
Make sure the remote is in the correct mode by pressing the
corresponding device key (TV, STREAMING•CABLE•SATELLITE).
corresponding device key (TV, STREAMING•CABLE•SATELLITE).
This tells the remote which device to operate.
This tells the remote which device to operate.
Menu access isn't supported for all brands. You may need to use
Remove any obstacles between the remote and the device. Make
your original remote control to access menu functions for some
sure you're aiming the remote at the device's IR sensor.
devices.
Make sure the batteries are fresh and are properly installed.
For more information, please visit www.RCAAudioVideo.com
Replace the batteries with two new AAA batteries, if necessary
(see the Battery Installation section).
Consumer Help Line: 1-800-420-7968
Problem: The remote can't be programmed to operate your
device.
If you are testing the remote while programming it, you may be
too far away from the device or at a wrong angle. There must be
Care and Maintenance
an unobstructed path between the remote and the IR sensor on
the device. Move closer and make sure you point the remote at the
• Keep the remote dry. If it gets wet, wipe it dry immediately.
device you're trying to control.
• Use and store the remote only in normal temperature environments.
If you're using the Direct Entry programming method to enter
• Handle the remote gently and carefully. Don't drop it.
the codes for your brand and the unit is still not functioning
• Keep the remote away from dust and dirt.
properly, try the auto, brand, or manual search method.
• Wipe the remote with a damp cloth occasionally to keep it looking new.
Make sure the batteries are fresh and are properly installed.
• Modifying or tampering with the remote's internal devices can cause
malfunction and invalidate its warranty.
Problem: The remote doesn't perform commands properly.
Make sure the remote is in the correct mode by pressing the
corresponding device key (TV, STREAMING•CABLE•SATELLITE).
This tells the remote which device to operate.
Make sure device is ready.
Limited Lifetime Warranty
You may have pressed an invalid key for the mode the remote is in.
If you're trying to enter a channel number directly, try pressing
the ENTER key after entering the channel number as this is a
requirement of certain models and brands.
Voxx Accessories Corporation (the "Company") warrants to you the
original retail purchaser of this product that should it, under normal use
There is a possibility that a programmed code may only be
and conditions, be proven defective in material or workmanship during its
able to control some of your device features (for example, only
lifetime while you own it, such defect(s) will be repaired or replaced (at the
turns a device on and off). To confirm that the device key is
Company's option) without charge for parts and repair labor.
programmed with the correct code for maximum functionality,
To obtain repair or replacement within the terms of the warranty, the product
test the device. Attempt to control a variety of the device's
is to be delivered with proof of warranty coverage (e.g. dated bill of sale),
functions with the remote. If some of the features of your
specification of defect(s), transportation prepaid, to an approved warranty
devices don't work, try programming the remote with a different
station. For the location of the nearest warranty station to you, call toll-free to
code in the list using the Direct Code Entry Method, until you
our control office: 1-800-645-4994.
find the code that allows the remote to control the majority of
This Warranty does not cover product purchased, serviced or used outside
your device's functions. Different codes can provide different
the United States or Canada. This Warranty is not transferable and does
levels of functionality.
not extend to costs incurred for installation, removal or reinstallation of
the product. This Warranty does not apply if in the Company's opinion,
the product has been damaged through alteration, improper installation,
Problem: The POWER key does not light when you press a key.
mishandling, misuse, neglect, accident, or the simultaneous use of different
You may have pressed an invalid key for the mode the remote is in.
battery types (e.g. alkaline, standard or rechargeable).
Make sure the remote is in the correct mode by pressing the
THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY IS
corresponding device key (TV, STREAMING•CABLE•SATELLITE).
LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO
This tells the remote which device to operate.
EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE PURCHASE PRICE
PAID BY PURCHASER FOR THE PRODUCT.
Make sure the batteries are fresh and are properly installed.
This Warranty is in lieu of all other express warranties or liabilities. ANY
Replace the batteries with two new AAA batteries, if necessary
IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF
(see the Battery Installation section).
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL
BE LIMITED TO DURATION OF THIS WARRANTY. IN NO CASE SHALL
Problem: The remote will not change channels on device.
THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL
DAMAGES WHATSOEVER. No person or representative is authorized
Make sure the remote is in the correct mode by pressing the
to assume for the Company any liability other than expressed herein in
corresponding device key (TV, STREAMING•CABLE•SATELLITE).
connection with the sale of this product.
This tells the remote which device to operate.
Some states/provinces do not allow limitations on how long an implied
Press the ENTER key after you enter a channel number.
warranty lasts or the exclusion or limitation of incidental or consequential
Remove any obstacles between the remote and the device. Make
damage so the above limitations or exclusions may not apply to you. This
Warranty gives you specific legal rights and you may also have other rights,
sure to aim the remote at the IR sensor on the device.
which vary from state/province to state/province.
©2016 Voxx Accessories Corp.
3502 Woodview Trace, Suite 220
Indianapolis, IN 46268
Trademark(s) ® Registered

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RCR002RWDZ and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for RCA RCR002RWDZ

  • Page 1 SLOW find the code that allows the remote to control the majority of This Warranty does not cover product purchased, serviced or used outside Tip: This remote is already programmed to operate most RCA- SLOW channel number (such as 59.1).
  • Page 2 Recuperación de Códigos, el control remoto no responderá. Si Para obtener los servicios de reparación o reemplazo dentro de los términos de televisores y receptores de satélite RCA. Sencillamente oprima para Obtener Máxima Funcionalidad” a continuación. apuntado directamente al panel intente programar el control remoto con un código diferente en la...

Table of Contents

Save PDF