Related Manuals for Living Earth Crafts CLOUD 9
Summary of Contents for Living Earth Crafts CLOUD 9
- Page 1 OPERATION MANUAL CLOUD 9™ LIFT TABLE For Tables Manufactured January 2002 – Current (800) 358-8292 (760) 597-2155 Fax: (760) 599-7374 REV. C-April. 2007...
-
Page 2: Table Of Contents
OPERATION MANUAL Living Earth Crafts Cloud 9 Electric Lift Your new Living Earth Crafts Cloud 9 Electric Lift table is an electronically operated table. This manual will assist you in operating and caring for your new table. Section 1: IMPORTANT SAFETY INSTRUCTIONS ........page 2-4 Section 2: OPERATING YOUR TABLE............ -
Page 3: Important Safety Instructions
When using an electrical furnishing, basic precautions should always be followed, including the following: Read all instructions before using the CLOUD 9 TABLE. DANGER- To reduce the risk of electrical shock: 1) Always unplug this furnishing from the electrical outlet before cleaning. - Page 4 7 Never use the side arms as handholds or body support mechanisms, especially when sitting or clients on or off the table. 8 Never attempt to use the foot lift section to support concentrated weight such as sitting or standing. SAVE THESE INSTRUCTIONS Operation manual – Cloud 9 03/05/08...
- Page 5 (A) below. Make sure that the product is connected to an outlet having the same configuration as the plug. No adapter should be used with this product. SAVE THESE INSTRUCTIONS Operation manual – Cloud 9 03/05/08...
-
Page 6: Operating Your Table
Push the area to the right of the image, and the calf/lower leg section will lower. Go to next page for additional suggestions on client comfort! Operation manual – Cloud 9 03/05/08... - Page 7 For Massage: There are two support bars located underneath the thigh section. These were designed to provide extra stability when the Cloud 9 is used in the flat, massage position. You can locate these support bars at the foot end of the table, underneath the shroud.
-
Page 8: Special Features
3. Removable Footrest. The footrest will need to be removed when your Cloud 9 is being used for pedicure treatments. To remove, loosen the knobs, located on the underside of the footrest. -
Page 9: Maintenance
Section 4 MAINTENANCE Cloud 9 Your new Cloud 9 table is relatively maintenance free. The motor and lift column are enclosed, so no cleaning or lubrication of these components is required. Here are some tips for proper maintenance of your table: 1. -
Page 10: Section 4: Maintenance
To lock into place, use the 9/16” wrench to reposition the upper hex nut so that is secure and tight against the upper leg. d. Test all legs to ensure that the upper hex nut is tight against the upper leg and secure in place. Operation manual – Cloud 9 03/05/08... -
Page 11: Trouble Shooting
TROUBLE SHOOTING Applies to All Cloud 9 Table Models If you are experiencing technical difficulties with your Cloud 9, we ask that you perform these trouble shooting techniques prior to contacting Living Earth Crafts. Special Note: The hand control does not function when more than one button is pushed simultaneously. -
Page 12: Technical Problems
TECHNICAL PROBLEMS Applies to All Cloud 9 Table Models With proper maintenance, your Living Earth Crafts table is designed to give you years of trouble free operation. If you should have a problem with your table, do not attempt to repair the table yourself. This will void the 2-year warranty that covers your table against defects in material and workmanship. -
Page 13: Warranty
ℵ Lifetime warranty applies to original owner, as long as you own your table or 5 years after the model is discontinued or five years for private label tables Operation manual – Cloud 9 03/05/08... -
Page 14: Specifications
Lifting capacity: 500 lbs ELECTRICAL DATA – Power Cord Grounded type see page 4 Input Voltage 120VAC ~ , 60 Hz Input Amperage Max. 2.44 A Duty Cycle 10%, Max. 1 min./ 9 min. Operation manual – Cloud 9 03/05/08...