American Standard Green Tea 3571 Installation And Operation Manual page 2

ROUGH-IN REFERENCES FOR
PIER TYPE INSTALLATIONS
AS DESIRED
F
CUTOUT
C
AS
DESIRED
TYPICAL TILE BEAD INSTALLATION
TILE
BEAD
STRIP
LEVELING STRINGER
1" x 4" (25mm x 102mm)
NOTE: Tile bead kit not included and must be purchased separately.
UNDER DECK MOUNTING INSTRUCTIONS
Please note that care must be taken to protect the surface of the tub
during all aspects of the installation.
Do not drill or cut the bath deck with the tub directly beneath it as
damage to the tub may result.
1. Install the tub per the installation instructions provided with the unit.
2. Prepare the bath deck support structure per the local codes.
Note - the bath deck must be self supporting.
3. Cut bath deck to your specifications.
4. Place the bath deck in position and trace the opening on the tub
with a soft pencil. Do not drill or cut the bath deck with the tub
directly beneath it as damage to the tub may result.
5. Remove the bath deck and apply a generous bead of waterproof
sealant on the outer edge of the traced line.
6. Replace the bath deck and secure it into place.
7. Apply additional sealant along the tub and bath deck interface as
necessary to ensure a watertight seal.
8. Remove excess sealant per the manufacturer's instructions.
755741-100 EN
MOUNTING
SURFACE
WATERPROOF
SEALANT
G
CUTOUT
TILE
WALLBOARD
SEALANT
BATH
ADHESIVE
not for support
ROUGH-IN REFERENCES FOR
RECESS TYPE INSTALLATIONS
BATH
C
E
NOTE:
FRONT EDGE OF BATH MUST BE SUPPORTED BY STUD WALL.
Waterproof Sealant
Bathtub
2
LEVELING
STRINGERS
Finished bath deck surface
material must be self-supporting
and secured per local codes
Bath deck
support
material
Tub support
structure per
installation
instructions
provided with
the tub