Table of Contents
Advertisement
Video CD Player Playback
GB
In order to playback video VIDEO-CD('S), make sure that your unit is
connected to your TV set.
This unit is designed for playback of video CD('S), version 1.1 and 2.0.
Only with version 2.0, is it possible to call up the on screen menu function.
This unit will not play back any other video VIDEO-CD('S) other than 1.1
and 2.0 versions.
1
Turn on the Standby/On switch and set the VCD mode.
2
Press the Open/Close ( ) button on the unit, to open the CD tray.
Result: "OPEN" is displayed and CD tray slides open.
3
Load a video-CD('S) with the label facing upwards in the tray.
4
Press the Open/Close ( ) button again to close the CD tray.
5
To playback:
In version 1.1, press the
as there is no menu-on-screen.
In version 2.0, load a video CD, "Video CD2.0", and "MENU ON"
are displayed on the TV screen. Press the
menu is displayed on the TV screen.
Select a number from the menu using Digits button on the remote
control and press the VCD/CD(
To return to the previous menu, press the Return button on the
remote control or the Enter button on the front panel .
When playing a video-CD('S) version 2.0, reading time on the
display may take longer, depending on the disc's contents.
6
Press
button on the remote control to receive a still picture.
Result: Pause is displayed, a still picture appears and the sound is
muted.
7
To return to normal playback, press VCD/CD(
8
Press the Stop (
Please make sure that the VIDEO-CD('S) to be played is not
flawed optically, as this may cause a distorted sound or the unit to
malfunction.
1
16
button for direct access to the film,
button and the
) button.
) button.
) button to stop playback.
2,4
8
5,6,7
Search Functions
You can find a certain passage faster during playback.
This function is possible in CD or VCD Ver 1.1 or Ver 2.0 menu off
mode.
1
To...
Scan forwards
Scan backwards
2
Release the Skip/Search buttons when the desired passage has
been found.
In the video CD version 1.1, where the disc's contents are over 15
minutes long, you can scan up or down by intervals of five minutes.
3
To...
Scan forwards by 5 minute intervals
Scan backwards by 5 minute intervals
Result: The picture is still, and the disc's contents are forwarded or
reversed by 5 minute intervals. Playback then resumes from
this new position.
In the SKIP/SEARCH or SCAN mode, the sound can only be partially
heard and the picture scenes will change sporadically, until the required
passage has been found.
Time Search Function
(This function is available only during the playback of a CD/VCD)
Please use this function for reproducing a desired track in a certain
time of playback.
1
Press the Time Search button.
2
Set a desired time by pressing the Digit buttons.
3
Press the Play (
) button.
2
Press and hold down...
Press...
3
1
Hide quick links:
Advertisement
Table of Contents
