Table of Contents
Advertisement
HDMI Function
What is HDMI (High Definition Multimedia Interface)?
This device transmits DVD video signal digitally without the process of converting to
analog. You can get sharper digital pictures by connecting the video to the TV using an
HDMI connection cable.
HDMI Audio ON/OFF function
•
The audio signals transmitted over the HDMI Cable can be toggled
ON/OFF.
Press the HDMI AUDIO button on the remote
control.
•
This toggles "AUDIO ON" and "AUDIO OFF" on the display.
•
AUDIO ON : Both video and audio signals are transmitted over the
HDMI connection cable, and audio output is through the TV
speakers only.
•
AUDIO OFF : Video is transmitted over the HDMI connection cable
only, and audio output is through the home theater speakers only.
Note
•
The default setting value of this product is HDMI AUDIO OFF.
•
HDMI AUDIO is automatically down-mixed to 2ch for TV
speakers.
•
If you turns off and on, or switch functions when the HDMI
AUDIO is set to ON, the HDMI AUDIO is automatically set to
OFF.
DCDi
(Directional Correlational Deinterlacing)
Converts the interlace signal to progressive to prevent flickering and to
remove distortion or noise on the edge of screen.
Press and hold DCDi button on the remote
control for over 3 seconds.
•
Each time the button is pressed, the selection alternates between
DCDi ON and DCDi OFF.
17
Function
Resolution Selection
•
This function allows the user to select screen resolution for HDMI and component output.
In Stop mode, press and hold the SD/HD button on the remote control.
•
Resolutions available for the HDMI output are 480P, 720P and 1080i.
Example: If the TV supports resolution up to 480p
Pressing the SD/HD button.
•
A 480p video signal is output through the HDMI outputs.
Caution
•
When both HDMI and COMPONENT jacks are connected, COMPONENT video is not
displayed.
•
For component video output, only 480P is supported.
Note
Note
•
Since this product has an embedded Video Upscaler function with Faroudja DCDi technology, it can enhance a
576i(480i) DVD resolution output to 480p/720p/1080i.
•
You do not have to make separate adjustments, since the Home Theater and TV will be automatically adjust
themselves to the optimal resolution and aspect ratio if connected to HDMI. (If the TV is an HDTV and has an
HDMI Input jack, output is automatically converted to 1080i resolution (if supported by the TV).)
•
Component output will give video in '480p' mode only during DVD disc playback.
•
When both HDMI and COMPONENT jacks are connected, COMPONENT video is not displayed.
•
See your TV owner's manual for more information on how to select the TV's Video Input source.
ENG
18
Advertisement
Table of Contents
