Connecting an External Analog Component
Example: Analog signal components such as a VCR or TV.
1
Connect Audio In on the main unit to Audio Out on the external analog component.
•
Be sure to match connector colors.
2
Press AUX on the remote control to select AUX.
•
Each time the button is pressed, the selection changes as follows: D.IN 1
•
You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD
•
To listen TV sound in 5.1 channel sound through the main unit, connect the Audio In on the
Note
main unit to the Audio Output on the TV.
•
You can connect Video Output jack on the VCR to the TV, and connect Audio Output jack on
the VCR to the HT-DS1000.
Audio Cable
If the external analog
component has only one
Audio Out, connect either left
or right.
L
R
D.IN 1
D.IN 2
AUX
D.IN 2
AUX.
FM.
24