Connecting Main Unit to Subwoofer
1
Use the supplied DIN audio connection cable to
connect DIN Audio Out on the main unit to DIN Audio
Input on the subwoofer.
2
Press the subwoofer power button on the subwoofer
to turn on the power.
Waring
The DIN Audio Connection Cable on this product contains lead, a chemical known to the State of
California to cause [cancer,and]birth defects or other reproductive harm.
handling.
Subwoofer Function
Subwoofer: The subwoofer is active, with a built-in a 150W
amplifier, and outputs rich bass through 8 inch
speaker units. You can listen to the optimal LFE
(bass) by using the subwoofer-only volume control
and the variable crossover control.
• The control is calibrated from –6dB (minimum) to
+6dB (maximum).
Crossover: The Crossover sets the cutoff frequency for the
subwoofer. Set the Crossover control for the best
bass response in your room.
•
You can adjust the bass or treble output from the
front, rear, center speakers and the subwoofer.
•
To the left increases the bass and to the right,
treble.
Wash hands after
18