Setup; General Setup Page - PDi -DVD-SH User Manual

Setup

You can change the default settings of this unit to customize its performance
to your own preference.
Note: Set up the system while playing is stopped or there is no disk in the
player.
To set up your system:
1. Press the SETUP button on the remote control.
2.The setup menu will appear on the screen. It includes General Setup,
Language, Audio, Picture, Speaker, and Dolby. You can exit from the setup
menu by pressing SETUP button again at any time during setting.
3. Press the direction buttons  or  to select a sub-menu to set up.
4. Press the direction buttons  or  to select the item that you want to set
up in the sub-menu.

General Setup Page

1. TV Display
•
NTSC
•
PAL
•
AUTO
2. SCREEN SAVER
•
On: The screen will display angle symbols when a multi-angle DVD is
running.
•
Off: The angle symbol will not be displayed.
3. RESOLUTION
•
480i/576p
•
480p/576p
•
720p
•
1080i
•
1080p
The items included on this menu are shown
at left.
Press  to highlight this item.
Press  to enter.
Press  button to choose the proper
selection.
Press ENT to confirm and press  to exit.
19