Samsung HT-AS730S User Manual page 40

SUrrOUnD SetUp (Continued)
Setting Dolby pro Logic ii X mode
This mode provides 7.1 channel sound from 2 channel sources.
1. Press SETUP/MENU button.
"INPUT" appears on the display and goes into Setup Mode.
~
2.
Press ▲▼ button to select "SURROUND", and then press the
ENTER.
3.
Press ▲▼ button to select "PL II x", and then press the
ENTER or ▶ button.
4. Press ▲▼ button to select the option you want, and then
press the ENTER or ▶ button.
mODe : Each time you press ▲▼ button, MOVIE  MUSIC
~
 GAME  MATRIX  PL will be selected in turn.
mOVie : Adds realism to the movie soundtrack.
mUSiC : Provides 7.1 channel surround sound for digital,
game : Enhances the excitement of the game's sound.
matriX : You will hear 7.1 channel surround sound.
pL : You will experience a surround effect with just the front
left and right speakers.
panOrama : You can set it ON or OFF.
~
(This mode extends the front stereo image to include the
surround speakers for an exciting "wraparound" effect with side wall imaging.)
DimenSiOn : You can set from -7 to +7.
~
(Incrementally adjusts the sound field (DSP)from the front or surround.)
Center WiDtH : You can set from 0 to 7.
~
(This sets the width of the center image. The higher the setting, the less sound comes from the
center speaker.)
M
`
PANORAMA, DIMENSION and CENTER WIDTH settings are enabled only if the mode is set to
"MUSIC".
`
You cannot use Dolby Pro Logic llx mode for multi channel signals such as Dolby Digital and DTS.
`
Pro Logic works only for PCM audio signals with sampling frequencies of 32KHz, 44KHz or
48KHz.
`
Sound will not be output from the surround back speakers if the PCM audio signal is mono.
0
analog or existing stereo sources such as CD,
TAPE, FM, TV and stereo VCR.




