6. DRILL
Use the DRILL to drill screws into the TRAY
HOLES. The DRILL can turn clockwise or
counterclockwise by sliding the DIRECTION
SWITCH on the side.
7. ACCESSORIES
Use the HAMMER or SPANNER to insert
the NAILS or SCREWS into the TRAY
HOLES.
8. AUTOMATIC SHUT-OFF
To prolong battery life, the VTech
automatically after several minutes of no input. The unit can be
turned on again by sliding the OFF/VOLUME SWITCH or sliding
the MODE SELECTOR.
The unit will also automatically turn off when the batteries are
very low.
My 1st ToolBox will shut off
®
7