Table of Contents
Advertisement
FEATURES AND BENEFITS
FRAME AND AXLES
FRAMES AND AXLES
All 2600 Series tractors are available in either 2WD or 4WD configurations. Depending on
which front axle you choose, you can rest assure that your 2600 can handle itself in any con-
dition. The long wheelbase increases weight transfer where good tractive performance for
draft work and hauling are important. Stability on hillsides is also increased which is essential
when pulling heavier implements. Having a longer wheelbase provides a more spacious op-
erating environment as well, making a long day in the field an enjoyable experience.
TREAD SETTINGS
A 2WD Massey Ferguson® 2600 comes
equipped with rugged box section front axle.
A box section front axle allows you to adjust
the tread setting in and out as desired. The
adjustments can be made in 4" increments.
The front axle adjustments allow the operator
to set his MF2600 up for row crop conditions.
STEERING ANGLE / OSCILLATION
The front axle on a 2WD 2600 Series tractor
enables the operator to make tight turns as
well as keep constant ground contact on un-
even terrain. These tight turns are accom-
plished with a steering angle of 55°. The front
axle will also oscillate 11° to ensure the front
tires are on the ground, even when the ground
beneath the operator is not even. These front
axle features enable the operator to fit in and
around the difficult places to reach in the field.
330-1
Hide quick links:
Advertisement
Table of Contents
