For your safety, always switch off the supply before changing lightbulbs, or cleaning. This LED is protected by a shade. This part must be replaced immediately should the shade become cracked or damaged. This fitting must not be used without the shade in place. Iss.2 21072017 www.saxbylighting.com Saxby Lighting. BH23 3PE...
Page 2
Installation & Wiring Thank you for purchasing this light fitting. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product. Please retain these instructions for future reference. Existing fittings must be completely removed before • Hold the product in position and mark the location installation of a new product. Before removing the of the fixing holes. Sensor must be at the base, as existing fitting, carefully note the position of each set shown below..