Page 3
BRIEF OPERATION OF MD300 REPEATER PANEL The fire alarm is activated Go to the MD300 repeater panel Evacuation reaction time (*) Press the “Silence” button Check on the repeater panel from which “loop” the alarm message originates (contact your installer for more information on...
Page 4
“Silence” button on the operating (1-9 minutes) front of the MD300 control panel. If the alarm was not accepted after the reaction time has elapsed, the evacuation procedure starts. Evacuation – intervention This is the time from the acceptance of the alarm by means of the “Silence”...
Need help?
Do you have a question about the MD300 and is the answer not in the manual?
Questions and answers