Troubleshooting; Disposal - Samsung MF68-00271A Instructions For Use Manual

Digital terrestrial receiver
Table of Contents

Advertisement

In some region, the digital terrestrial signal may be weak.
So you'd better use the antenna in which the booster was built,
for watching the weak sinal channels.
You can download and upgrade the system software of the receiver through
a specific channel through a specific channel designated by the broadcaster.
The Distributor will provide you with more information about that.
Problem
No display LED on
the front panel;
No power supply
No pictures on the screen
No sound
Remote Control does not
operate directly
Poor picture quality
On-Screen Error Message
"Searching for signal"
On-Screen Error Message
"Channel data
does not exist."

DISPOSAL

The device, packaging material (e.g. Styrofoam) and the batteries must never
be disposed of with household refuse.
Please obtain appropriate information about the regulations in your community,
and dispose of all refuse in accordance with regulations at the separate
locations provided.

TROUBLESHOOTING

Possible cause
Power cord
not plugged in correctly
Receiver in Standby mode;
Scart not connected tightly
to video output of television;
incorrect channel or video
output selected on television
Audio cord connected
incorrectly;
Loudness level = 0;
Muting active
incorrect operation;
Batteries dead or inserted
incorrectly
Signal strength too low
Antenna cable not connected
or not tight;
incorrect position of the
antenna;
Rereiver not yet set
GB-28
Solution of the problem
Power cord plug in correctly
Back switch in correctly
Set receiver to "On";
Check connection and correct;
Check channel and video output and
correct (TV instruction manual)
Check connection and correct;
Increase loudness on television set;
Press the MUTE key
Point remote control
towards the Receiver.
Replace batteries or insert correctly
Check the signal strength in
the "Auto Scanning" menu, correct
alignment of your antenna
Check connection and correct;
Check position and correct,
Check the signal strength in
the "Auto Scanning" menu
Scanning of in "Automatic scanning"
or "Manual scanning" menu
D
I
G
I
T
A
L
T
E
R
R
E
S

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dtb-9401f

Table of Contents